首页 | 本学科首页   官方微博 | 高级检索  
     

烟气轮机动叶片冲蚀机理的数值研究与分析
引用本文:于洋,王晓放,李丽丽.烟气轮机动叶片冲蚀机理的数值研究与分析[J].燃气轮机技术,2011,24(2):51-55.
作者姓名:于洋  王晓放  李丽丽
作者单位:大连理工大学能源与动力学院,辽宁大连,116024
摘    要:本文采用Spalart-Allamaras湍流模型,应用NUMECA软件对某单级烟气轮机内部流场进行数值模拟,并根据计算结果对此烟气轮机动叶片的冲蚀机理进行分析.分析结果表明:喷嘴斜切部分产生激波,受激波影响喷嘴出口气流不稳定,加之动叶扭曲规律及安装角与工质在动叶入口的速度方向不符,使动叶流道内存在大面积的二次流动、附...

关 键 词:烟气轮机  数值模拟  冲蚀  二次流动

Numerical Investigation of Moving Blade Erosion in a Flue Gas Turbine
YU Yang,WANG Xiao-fang,LI Li-li.Numerical Investigation of Moving Blade Erosion in a Flue Gas Turbine[J].Gas Turbine Technology,2011,24(2):51-55.
Authors:YU Yang  WANG Xiao-fang  LI Li-li
Affiliation:YU Yang,WANG Xiao-fang,LI Li-li(School of Energy and Power Engineering,Dalian University of Technology,Liaoning Dalian,116024,China)
Abstract:Numerical simulation of inner flow field of a one-stage flue gas turbine has been carried out with the Spalart-Allamaras turbulence model.The software NUMECA was utilized during this process.Then the mechanism of the moving blade erosion has been analyzed based on the results of the simulation.The research shows that shock wave is produced near the throats of the nozzles and the shock wave causes the disordered flow at the outlet of the nozzles.Also due to the unmatched design between the inlet flow to the ...
Keywords:flue gas turbine  numerical simulation  erosion  secondary flow  
本文献已被 CNKI 维普 万方数据 等数据库收录!
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号