首页 | 本学科首页   官方微博 | 高级检索  
     

水膜闪蒸真空制冰的换热特性
引用本文:纪珺,章学来,刘小微,吴云云,韩中,杨阳. 水膜闪蒸真空制冰的换热特性[J]. 化工学报, 2013, 64(4): 1236-1241. DOI: 10.3969/j.issn.0438-1157.2013.04.016
作者姓名:纪珺  章学来  刘小微  吴云云  韩中  杨阳
作者单位:上海海事大学商船学院,上海 201306
基金项目:国家自然科学基金项目(50976064);上海市教委重点项目(12ZZ154);上海市教委重点学科项目(J50603)~~
摘    要:引言当一定温度的液体突然暴露在低于其饱和压力的环境下时,液体由最初的平衡状态变成过热状态,液体中的过热量已经不能以显热的方式来包含能量,不能继续存在于液体中,会迅速转换为蒸发潜热,形成汽泡,同时液体温度迅速下降,这个过程被称为液体的闪蒸。由于闪蒸现象伴随着大量的水蒸气生成和剧烈的温度下降,在现代工业中,闪蒸被广泛应用在海

关 键 词:水膜  闪蒸  水膜厚度  初始温度  闪蒸压力  
收稿时间:2012-07-16
修稿时间:2012-10-22

Heat transfer characteristics of water film flash evaporation in vacuum ice making
JI Jun , ZHANG Xuelai , LIU Xiaowei , WU Yunyun , HAN Zhong , YANG Yang. Heat transfer characteristics of water film flash evaporation in vacuum ice making[J]. Journal of Chemical Industry and Engineering(China), 2013, 64(4): 1236-1241. DOI: 10.3969/j.issn.0438-1157.2013.04.016
Authors:JI Jun    ZHANG Xuelai    LIU Xiaowei    WU Yunyun    HAN Zhong    YANG Yang
Affiliation:(College of Merchant Marine, Shanghai Maritime University, Shanghai 201306, China
Abstract:A water film flash evaporation vacuum ice-making system is developed.The experiment was carried out to investigate the influence of flash evaporation pressure, thickness and initial temperature of water film on the flash evaporation process.The thickness of the water film was 15, 35, 55 and 75 mm.Initial temperature of water film ranged from 2℃ to 10℃, and flash evaporation pressure varied from 100 Pa to 600 Pa.The characteristics of the flash evaporation process were recorded using a CCD camera of the visualization system.The experimental results show that under the operating conditions, lower flash evaporation pressure leads to faster change of water film temperature at constant initial temperature of water film.Higher initial temperature of water film makes the water film temperature varies more quickly at constant pressure.As water film thickness increases, the decrease rate of water film temperature reduces.Based on the experimental results, a correlation for water film temperature with flash evaporation pressure, thickness and initial temperature of water film is presented with the maximum error of 24.19%.
Keywords:water film  flash evaporation  film thickness  initial temperature  flash evaporation pressure
本文献已被 CNKI 万方数据 等数据库收录!
点击此处可从《化工学报》浏览原始摘要信息
点击此处可从《化工学报》下载免费的PDF全文
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号