| 基于VERICUT的异型石材罗马柱数控加工仿真 |
| |
| 引用本文： | 冯松涛,吴玉厚,张丽秀,赵德宏,张珂. 基于VERICUT的异型石材罗马柱数控加工仿真[J]. 机床与液压, 2011, 39(1). DOI: 10.3969/j.issn.1001-3881.2011.01.027 |
| |
| 作者姓名： | 冯松涛 吴玉厚 张丽秀 赵德宏 张珂 |
| |
| 作者单位： | 沈阳建筑大学,辽宁沈阳,110168 |
| |
| 基金项目： | “十一五”国家科技支撑计划项目(2006BAJ12B07); 辽宁省级工程技术研究中心建设项目(2008402015); 国家新产品重点推广计划项目(2008GRB00022); 住房和城乡建设部资助项目(2009-K8-04); 沈阳建筑大学校青年基金项目(2009004) |
| |
| 摘 要： | 应用VERICUT及UGNX软件,对新开发的八轴双五联动数控异型石材多功能复合加工中心进行虚拟建模,并使用VERICUT软件对异型石材典型制品——罗马柱进行加工仿真研究。通过仿真检测出由UGNX软件自动生成的程序中存在的过切、干涉等问题,并对加工程序进行修改,改善数控加工工艺。通过此法不仅提高了数控机床加工功能和效率,而且降低了生产成本。
|
| 关 键 词： | VERICUT 异型石材 建模 加工仿真 |
NC Machining Simulation of Heterotypic Stone ROME Pillar Base on VERICUT |
| |
| FENG Songtao,WU Yuhou,ZHANG Lixiu,ZHAO Dehong,ZHANG Ke. NC Machining Simulation of Heterotypic Stone ROME Pillar Base on VERICUT[J]. Machine Tool & Hydraulics, 2011, 39(1). DOI: 10.3969/j.issn.1001-3881.2011.01.027 |
| |
| Authors: | FENG Songtao WU Yuhou ZHANG Lixiu ZHAO Dehong ZHANG Ke |
| |
| Affiliation: | FENG Songtao,WU Yuhou,ZHANG Lixiu,ZHAO Dehong,ZHANG Ke(Shenyang Jianzhu University,Shenyang Liaoning 110168,China) |
| |
| Abstract: | With the software VERICUT and UGNX,virtual model of the newly developed manufacture center which is eight-axis with double five-linkages style and multifunctional complex machining for heterotypic stone was established.Manufacturing simulation for heterotypic stone ROME pillar was made by using the software VERICUT.The problems of the NC program generated automatically by UGNX,such as gouge and collision,were found out through simulation.Then machining program was modified and NC machining technics was impr... |
| |
| Keywords: | VERICUT Heterotypic stone Modeling Machining simulation |
| 本文献已被 CNKI 万方数据 等数据库收录！ |
|
