| 聚酯薄膜生产过程中“脱夹”因素分析 |
| |
| 引用本文： | 李贵华 李建新. 聚酯薄膜生产过程中“脱夹”因素分析[J]. 合成纤维, 2005, 34(12): 43-45 |
| |
| 作者姓名： | 李贵华 李建新 |
| |
| 作者单位： | 中石化仪征化纤股份有限公司短纤中心,江苏,仪征,211900 |
| |
| 摘 要： | 分析了双向拉伸PET(BOPET)薄膜生产过程中“脱夹”因素。结果表明:薄膜厚度不均、拉伸温度、压辊和红外加热器压力不均及安装检修不当是主要影响因素,通过调整检查可以减少“脱夹”的产生。
|
| 关 键 词： | BOPET薄膜 脱夹 拉伸比 EPC 拉伸温度 |
| 文章编号： | 1001-7054(2005)12-0043-03 |
| 收稿时间： | 2005-10-17 |
| 修稿时间： | 2005-10-17 |
Study on the Influence Factors of Doff-clip in BOPET Film Production |
| |
| LI Gui-hu,LI Jian-xing. Study on the Influence Factors of Doff-clip in BOPET Film Production[J]. Synthetic Fiber in China, 2005, 34(12): 43-45 |
| |
| Authors: | LI Gui-hu LI Jian-xing |
| |
| Affiliation: | Sinopec Yizheng Chemical Fibre Co., Ltd., Jiangsu Yizheng 211900 |
| |
| Abstract: | The factors of "doff-clip" of BOPET film was studied. The results showed the uneveness in thickness of film, drawing temperature, pressure of both roller and infrared heater were main influence factors. In addition, irregular installation and improper examination and repair were the factors too. Adjusting above-mentioned factors could reduce the "doff-clip". |
| |
| Keywords: | BOPET film doff-clip drawing rate EPC drawing temperature |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
| 点击此处可从《合成纤维》浏览原始摘要信息 |
|
点击此处可从《合成纤维》下载全文 |
