In situ TEM nanoindentation and dislocation-grain boundary interactions: a tribute to David Brandon |
| |
Authors: | Jeff T. M. De Hosson Wouter A. Soer Andrew M. Minor Zhiwei Shan Eric A. Stach S. A. Syed Asif Oden L. Warren |
| |
Affiliation: | (1) Department of Applied Physics, Materials Science Centre and the Netherlands Institute for Metals Research, University of Groningen, Nijenborgh 4, Groningen, 9747 AG, the Netherlands;(2) National Center for Electron Microscopy, Lawrence Berkeley National Laboratory, One Cyclotron Road, MS 72, Berkeley, CA 94720, USA;(3) School of Materials Engineering, Purdue University, West Lafayette, IN 47906, USA;(4) Hysitron, Inc., 10025 Valley View Road, Minneapolis, MN 55344, USA |
| |
Abstract: | As a tribute to the scientific work of Professor David Brandon, this paper delineates the possibilities of utilizing in situ transmission electron microscopy to unravel dislocation-grain boundary interactions. In particular, we have focused on the deformation characteristics of Al–Mg films. To this end, in situ nanoindentation experiments have been conducted in TEM on ultrafine-grained Al and Al–Mg films with varying Mg contents. The observed propagation of dislocations is markedly different between Al and Al–Mg films, i.e. the presence of solute Mg results in solute drag, evidenced by a jerky-type dislocation motion with a mean jump distance that compares well to earlier theoretical and experimental results. It is proposed that this solute drag accounts for the difference between the load-controlled indentation responses of Al and Al–Mg alloys. In contrast to Al–Mg alloys, several yield excursions are observed during initial indentation of pure Al, which are commonly attributed to the collective motion of dislocations nucleated under the indenter. Displacement-controlled indentation does not result in a qualitative difference between Al and Al–Mg, which can be explained by the specific feedback characteristics providing a more sensitive detection of plastic instabilities and allowing the natural process of load relaxation to occur. The in situ indentation measurements confirm grain boundary motion as an important deformation mechanism in ultrafine-grained Al when it is subjected to a highly inhomogeneous stress field as produced by a Berkovich indenter. It is found that solute Mg effectively pins high-angle grain boundaries during such deformation. The mobility of low-angle boundaries is not affected by the presence of Mg.Special title: Advanced Materials and Characterization: Proceedings of the Brandon Symposium; Guest Editors: Wayne D. Kaplan and Srinivasa Ranganathan |
| |
Keywords: | |
本文献已被 SpringerLink 等数据库收录! |
|