| 基于UGNX的五坐标数控编程后处理程序开发应用 |
| |
| 引用本文： | 王华侨,王建国,许建明.基于UGNX的五坐标数控编程后处理程序开发应用[J].模具工业,2006,32(11):67-72. |
| |
| 作者姓名： | 王华侨 王建国 许建明 |
| |
| 作者单位： | 中国三江航天集团国营红阳机械厂,湖北,孝感,432100 |
| |
| 摘 要： | 针对UGNX平台下的五坐标数控铣削编程后处理程序开发,以PostBuilder为环境,详细介绍了其五坐标数控铣削机床的后处理程序开发的关键技术,包括PostBuilder后处理开发模式、五坐标机床运动学原理配置、TCL语言应用等方面,并以FIDIA KR214六坐标高速铣削加工中心的后处理开发为实例进行应用说明。
|
| 关 键 词： | 五坐标数控铣削编程 后处理程序 六坐标高速铣削加工中心 |
| 文章编号： | 1001-2168(2006)11-0067-06 |
| 收稿时间： | 06 13 2006 12:00AM |
| 修稿时间： | 2006年6月13日 |
Application and development of Unigraphics NX-based postprocessor program of 5-axis numerical control programming |
| |
| WANG Hua-qiao,Wang Jian-guo,XU Jian-ming.Application and development of Unigraphics NX-based postprocessor program of 5-axis numerical control programming[J].Die & Mould Industry,2006,32(11):67-72. |
| |
| Authors: | WANG Hua-qiao Wang Jian-guo XU Jian-ming |
| |
| Affiliation: | Hongyang Machine Factory of China Sanjiang Aerospace Group, Xiaogan, Hubei 432100, China |
| |
| Abstract: | The key technology in developing postprocessor of 5-axis numerical control milling machine based on PostBuilder of UGNX software was described in detail, including PostBuilder post-processing development mode, 5-axis machine tool kinematics principle configuration and application of tool command language. The development of post-processing for FIDIA KR214 6-axis high speed milling machining center was taken as an application example. |
| |
| Keywords: | 5-axis numerical control milling programming postprocessor 6-axis high-speed milling center |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
