| 基于UGNX6．0的多腔注塑模浇注系统设计的研究 |
| |
| 引用本文： | 熊毅.基于UGNX6．0的多腔注塑模浇注系统设计的研究[J].模具技术,2013(6):53-56. |
| |
| 作者姓名： | 熊毅 |
| |
| 作者单位： | 河南工业职业技术学院机械工程系,河南南阳473009 |
| |
| 摘 要： | 利用UGNX6．0的MoldWizard设计多型腔模具时，由于UGNX6．0的参数化和关联技术的原因，流道位置信息容易出错。为了正确设计流道，利用去除参数化的原理，通过合并腔技术、手工创建型芯技术和基于WAVE的自顶向下装配的技术，解决了流道信息错误的问题，实现了多腔模流道的正确设计，同时这些技术可解决由于参数化和关联技术导致的其他错误。
|
| 关 键 词： | UGNX 6 0 浇注系统 合并腔 型芯 自顶向下 |
Research on gating system design of multi-cavity injection mould based on UG NX 6. 0 |
| |
| XIONG Yi.Research on gating system design of multi-cavity injection mould based on UG NX 6. 0[J].Die and Mould Technology,2013(6):53-56. |
| |
| Authors: | XIONG Yi |
| |
| Abstract: | ： When design multi-cavity mould in UG NX 6.0 with MoldWizard, port location information is error-prone due to parametric and relating technology in UG NX 6.0. In or- der to correctly design the flow, using the principle of removing the parameterized, by mer- ging the cavity technology, manually creating core technology and top-down assembly tech- nology based on WAVE, port location information error was solved and multi-cavity flow correctly design was realized. In the meantime, these technology can be used to solve other problems caused by parametric and relating technology. |
| |
| Keywords: | UG NX 6 0 gating system merge cavity core top-down |
| 本文献已被 CNKI 维普 等数据库收录！ |
