| TC10钛合金相变点的测定 |
| |
| 引用本文： | 李美岁,张健康,唐寿全.TC10钛合金相变点的测定[J].宁夏工程技术,2014(1):21-23. |
| |
| 作者姓名： | 李美岁 张健康 唐寿全 |
| |
| 作者单位： | [1]西北稀有金属材料研究院,宁夏石嘴山753000 [2]宁夏东方钽业股份有限公司,宁夏石嘴山753000 |
| |
| 摘 要： | 分别用计算法、热膨胀法和连续升温金相法测定了TC10钛合金的β相转变温度.结果表明,计算法得到该合金相变点温度为936℃,热膨胀法测得该合金相变点温度为939.6℃,连续升温金相法测得该合金相变点温度为937.5℃.3种方法测得的结果相当接近,说明这3种方法可以相互结合使用.
|
| 关 键 词： | 计算法 热膨胀法 连续升温金相法 TC10钛合金 相变点 |
Determination of phase transition point of TC10 titanium alloy |
| |
| LI Meisui,ZHANG Jiankang,TANG Shouquan.Determination of phase transition point of TC10 titanium alloy[J].Ningxia Engineering Technology,2014(1):21-23. |
| |
| Authors: | LI Meisui ZHANG Jiankang TANG Shouquan |
| |
| Affiliation: | 1. Northwest Rare Metal Materials Institute, Shizuishan 753000, China; 2. Ningxia Orient Tantalum Industry Co., Shizuishan 7.53000, China) |
| |
| Abstract: | The β phase transition temperature of TC10 titanium alloy was determined by calculation method, thermal expansion analysis and continuous heating metallographic method. The results show that the phase transition temperature point from calculation method is 936℃, measured temperature point with thermal expansion method is 939.6 ℃, and it is 937.5℃ tested by continuous heating metallographic method. The results of three methods are similar; it indica/s that three methods can he used in combinalion. |
| |
| Keywords: | calculation melhod thermal expansion method continuous heating metallographic method the TCIO titanium alloy lransition temperature |
| 本文献已被 CNKI 维普 等数据库收录！ |
