|
|||||
|
|
| 铸铁凸轮轴阶梯式浇注系统智能参数化CAD研究 | |
| 引用本文： | 胡侨丹,罗蓬,杨屹,苏玉. 铸铁凸轮轴阶梯式浇注系统智能参数化CAD研究[J]. 铸造, 2004, 53(4): 295-298 |
| 作者姓名： | 胡侨丹 罗蓬 杨屹 苏玉 |
| 作者单位： | 1. 四川大学制造科学与工程学院,四川,成都,610065 2. 贵州工业大学机械工程与自动化学院,贵州,贵阳,550003 3. 长安汽车,集团,有限责任公司,重庆,400023 |
| 基金项目： | 国家留学基金委留学基金 |
| 摘 要： | 根据误差反向传播(BP)神经网络的原理,结合Obiect ARX参数化三维建模技术,开发了基于AutoCAD软件环境的铸铁凸轮轴阶梯式浇注系统智能化CAD软件.文中讨论了系统的构建思想,研究了系统智能化与参数化设计的技术实现手段.结合六缸发动机铸铁凸轮轴HD6105Q13001的浇注系统工艺实例,给出了智能参数化CAD系统的设计结果. |
| 关 键 词： | 铸铁凸轮轴 阶梯式浇注系统 神经网络 智能参数化CAD |
| 文章编号： | 1001-4977(2004)04-0295-04 |
| 修稿时间： | 2003-12-29 |
Intelligent Parametric CAD for Step Gating System of Cast-iron Camshaft |
|
| HU Qiao-dan,LUO Peng,YANG Yi,SU Yu. Intelligent Parametric CAD for Step Gating System of Cast-iron Camshaft[J]. Foundry, 2004, 53(4): 295-298 | |
| Authors: | HU Qiao-dan LUO Peng YANG Yi SU Yu |
| Affiliation: | HU Qiao-dan~1,LUO Peng~2,YANG Yi~1,SU Yu~3 |
| Abstract: | In this paper, according to principles of error back-propagation (BP) neural network, combined with three dimensional parametric modeling based on Object ARX technology, an intelligent CAD software system for step gating system of cast-ironed camshaft was developed, based on AutoCAD environment. Intelligent and parametric ideas of system development and their realizing ways were studied. As an example, a design scheme for gating system of six-cylindrical engine camshaft was provided. |
| Keywords: | cast-ironed camshaft step gating system neural network intelligent and parametric CAD |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ | |