| 高水头船闸阀门段体型优化三维数值模拟 |
| |
| 引用本文： | 杨忠超,杨斌,陈明栋,胡雪梅.高水头船闸阀门段体型优化三维数值模拟[J].水利水电科技进展,2010,30(2):10-13. |
| |
| 作者姓名： | 杨忠超 杨斌 陈明栋 胡雪梅 |
| |
| 作者单位： | 重庆交通大学内河航道整治技术交通行业重点实验室,重庆,400074 |
| |
| 基金项目： | 交通部西部建设项目，重庆市教委基金，重庆市科委基金 |
| |
| 摘 要： | 采用动网格技术和VOF方法对阀门开启过程进行非恒定流三维紊流数值模拟,分析阀门段水流急变分离的流态、流速、压力等水力特性参数的时空演化规律,分析出现空蚀危险的区域和时刻。针对阀门后突扩体顶板和升坎凸弧处出现的较低负压问题,提出8种体型方案,并分析体型参数对流速、流态、压强分布的影响,遴选出最佳体型。分析结果表明,方案3的顶板压强最大,方案8的升坎凸弧处压强最大。
|
| 关 键 词： | 高水头船闸 阀门 紊流数值模拟 动网格 空蚀 体型优化 |
| 修稿时间： | 2010/4/20 0:00:00 |
Three dimensional numerical simulation of figure optimization of valves of high head locks |
| |
| YANG Zhong-chao,YANG Bin,CHEN Ming-dong,HU Xue-mei.Three dimensional numerical simulation of figure optimization of valves of high head locks[J].Advances in Science and Technology of Water Resources,2010,30(2):10-13. |
| |
| Authors: | YANG Zhong-chao YANG Bin CHEN Ming-dong HU Xue-mei |
| |
| Affiliation: | YANG Zhong-chao,YANG Bin,CHEN Ming-dong,HU Xue-mei(Key Laboratory Inl, Waterway Regulation Engineering of Ministry of Communications,Chongqing Jiaotong University,Chongqing 400074,China) |
| |
| Abstract: | The dynamic mesh technology and the VOF method were employed to conduct 3D numerical simulation of unsteady flows for the opening process of valves of high head locks.The spatial and temporal evolution rules of hydraulic parameters such as flow pattern,flow velocity and pressure were analyzed.The region and time with the occurrence of cavitation erosion were discovered.As for the low negative pressure problem on the ceiling and the end of rise step,8 design schemes for the figure optimization were proposed.... |
| |
| Keywords: | high head lock valve numerical simulation of turbulent flows dynamic mesh cavitation erosion shape-type optimization |
| 本文献已被 CNKI 万方数据 等数据库收录！ |
| 点击此处可从《水利水电科技进展》浏览原始摘要信息 |
|
点击此处可从《水利水电科技进展》下载全文 |
|
