|
|||||
|
|
| 从微观组织看中硅钼蠕铁排气管伸长率低的原因 | |
| 引用本文： | 段汉桥,袁福安,魏伯康,喻平,武炳焕,刘永安. 从微观组织看中硅钼蠕铁排气管伸长率低的原因[J]. 热加工工艺, 2002, 0(2): 40-42 |
| 作者姓名： | 段汉桥 袁福安 魏伯康 喻平 武炳焕 刘永安 |
| 作者单位： | 1. 华中科技大学,材料学院,湖北,武汉,430074 2. 华中科技大学,材料学院,湖北,武汉,430074;东风汽车公司,铸造一厂,湖北,十堰,442048 3. 东风汽车公司,铸造一厂,湖北,十堰,442048 |
| 摘 要： | 对试生产的中硅钼合金蠕墨铸铁排气管铸件本体伸长率不足的原因进行了显微组织分析。发现，在伸长率不足的蠕铁排气管铸件本体的微观组织中，沿晶界普遍存在一定数量的钼的碳化物（Fe,Mo)3C和复合磷共晶Fe (Fe,Mo)3C (Fe,Mo)3P，这是造成铸件伸长率低的根本原因。通过采用随流瞬时孕育，能有效地抑制凝固时钼的复合碳化物和复合磷共晶在晶界的生成，从而大幅度地提高铸件的伸长率。 |
| 关 键 词： | 微观组织 中硅钼蠕铁 排气管 伸长率 汽车 |
| 文章编号： | 1001-3814(2002)02-0040-03 |
| 修稿时间： | 2001-08-25 |
Reason Analysis on Low Percentage Elongation of Mid-Si-Mo VG Cast Iron Exhaust Tube Casting from Microstructure |
|
| DUAN Han qiao ,YUAN Fu an ,,WEI Bo kang ,YU Ping ,WU Bing huan ,LIU Yong an. Reason Analysis on Low Percentage Elongation of Mid-Si-Mo VG Cast Iron Exhaust Tube Casting from Microstructure[J]. Hot Working Technology, 2002, 0(2): 40-42 | |
| Authors: | DUAN Han qiao YUAN Fu an WEI Bo kang YU Ping WU Bing huan LIU Yong an |
| Affiliation: | DUAN Han qiao 1,YUAN Fu an 1,2,WEI Bo kang 1,YU Ping 2,WU Bing huan 2,LIU Yong an 2 |
| Abstract: | The reasons of low percentage elongation of mid Si Mo vermicular graphite cast iron exhaust tube casting in trial production were analyzed. The result shows that there are some molybdenum carbide (Fe, Mo) 3C and composite phosphide eutectic Fe + (Fe, Mo) 3C + (Fe, Mo) 3P along the grain boundary and this is the essential reason of low percentage elongation of the casting. Using stream inoculation technology can restrain the emergence of the molybdenum carbide and composite phosphide eutectic and increase the percentage elongation of the casting obviously. |
| Keywords: | vermicular graphite cast iron exhaust tube percentage elongation microstructure |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ | |