Size of plastic region owing to blunting of the precrack tip andJ lc value in several types of structural steels

In this study, a three-point bendJ _lc fracture-toughness test was carried out using four types of structural steels at room temperature. The values of (γ _p)V, which represent the width of the region where the voids are located just ahead of the crack tip, were measured by Beacham's method [9] with the help of a scanning electron microscope (SEM). The experimental (γ _p) values and the theoretical values obtained using the finite element method (FEM) or calculated fromK at initiation are in good agreement. It was found that there is a certain linear relationship between (γ _p)Vand the stretched zone width (SZW), and an experimental relationship betweenJ _lc andσ _flow·(γ _p)V which may be expressed by the following equation: $$J_{lc} = 44.1 + 0.35sigma _{{text{flow}}} cdot (gamma _{text{p}} )V_c KJ$$ whereσ _flow is the average value of the yield stress and the ultimate tensile strength. (γ _p)V _c represents the critical value of (γ _p)V. The numerical constant 44.1 kJ m^?2 is considered to be aJ _lc value for brittle fracture of the material tested, according to the authors' previous results. It is possible to calculateJ _lc if (γ _p)V _c can be measured.