| Abstract: | Ethylene vinyl alcohol (EVOH) copolymer is studied as a host for low concentrations, up to 1 wt%, of organically treated clay. The clay develops a high interaction level with EVOH and thus high torque levels accompany the structuring process leading to the formation of nanocomposites. Extrusion residence time, successive extrusion passes, screw rotational speed, and processing temperature were all found to affect the morphology and the thermal and mechanical properties of the resulting composites. The extrusion compounded composites were subsequently injection molded. A subtle balance of processing parameters is required to achieve improved properties. Long extrusion residence times were found important for good clay dispersion in some cases, whereas in other cases an exfoliated structure was obtained already after the first extrusion pass. Two organically treated clay types processed at the same conditions were examined, and found to result in different morphology and mechanical behavior. Compression molding of extrusion compounded materials, under several extrusion conditions, was studied to illustrate the effect of shear level on the resulting morphology. The delamination level was higher after compression molding compared to that after injection molding. EVOH thermal properties and thermal stability of the related composites were also examined using differential scanning calorimetry and thermal gravimetric analysis. Higher extrusion processing temperature (220 compared to 200°C) was found to change the crystallization process of EVOH in the presence of clay, leading to significant decrease in Tm and Tc compared to that of the neat EVOH. POLYM. COMPOS., 26:343–351, 2005. © 2005 Society of Plastics Engineers |
