| 超薄成形件复合模设计 |
| |
| 引用本文： | 甄瑞麟. 超薄成形件复合模设计[J]. 模具工业, 2006, 32(9): 43-44 |
| |
| 作者姓名： | 甄瑞麟 |
| |
| 作者单位： | 陕西国防工业职业技术学院,机械系,陕西,西安,710302 |
| |
| 摘 要： | 对振膜成形零件的成形工艺进行了分析,采用拉伸、冲孔、切边聚氨酯橡胶复合模成形零件,模具采用聚氨酯橡胶作凸凹模,并介绍了复合模的结构、特点及工作过程。经生产验证,模具结构合理、生产效率高,有很好的技术经济效益。
|
| 关 键 词： | 超薄成形件 聚氨酯橡胶凸凹模 双弹顶机构 |
| 文章编号： | 1001-2168(2006)09-0043-02 |
| 收稿时间： | 2006-04-25 |
| 修稿时间： | 2006-04-25 |
Design of compound die for ultrathin component |
| |
| ZHEN Rui-lin. Design of compound die for ultrathin component[J]. Die & Mould Industry, 2006, 32(9): 43-44 |
| |
| Authors: | ZHEN Rui-lin |
| |
| Abstract: | The forming process of diaphragm was analyzed. A drawing, punching and trimming compound die was developed with polyurethane rubber as punch and die. The characteristic of the die structure and working process was introduced. The die practically proved to be feasible in structure and high in production and technical economic efficiency. |
| |
| Keywords: | ultrathin component polyurethane rubber punch and die dual spring ejecting mechanism |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
