| 挠性板部分埋入制作刚挠结合板 |
| |
| 引用本文： | 黄勇,胡永栓,朱兴华,陈正清,吴会兰.挠性板部分埋入制作刚挠结合板[J].电子元件与材料,2012(8):50-55. |
| |
| 作者姓名： | 黄勇 胡永栓 朱兴华 陈正清 吴会兰 |
| |
| 作者单位： | 珠海方正印刷电路板发展有限公司 |
| |
| 摘 要： | 介绍了一种刚挠结合板制作新技术,只在需要弯折的部位埋入挠性板,通过挠性板使各刚性板之间实现互连。详细分析了设计与材料对刚挠结合板的影响,研究了预压合保护膜、挠性板埋入层压等关键工艺,给出了工艺难点的具体解决办法。结果表明,该技术提高了挠性板材的使用率,简化了挠性板及刚挠结合板加工工艺,使刚挠结合板成品率提高至少8%。
|
| 关 键 词： | 刚挠结合 挠性板 半固化片 部分埋入 印制电路板(PCB) |
Flex partly embedded rigid-flex PCB |
| |
| HUANG Yong,HU Yongshuan,ZHU Xinghua,CHEN Zhengqing,WU Huilan.Flex partly embedded rigid-flex PCB[J].Electronic Components & Materials,2012(8):50-55. |
| |
| Authors: | HUANG Yong HU Yongshuan ZHU Xinghua CHEN Zhengqing WU Huilan |
| |
| Affiliation: | (Zhuhai Founder PCB Development Co.Ltd,Zhuhai 519173,Guangdong Province,China) |
| |
| Abstract: | A new technology for manufacturing rigid-flex PCB was presented,the flexible boards were only embedded in where needed to be bended,and the rigid areas were interconnected by flexible boards.The effects of design and materials on rigid-flex PCB were analyzed.Protective film pre-laminating,flexible board embedded laminating and other key processes were studied and the solution of technology difficulty was provided.The results show that the utilization rate of flexible material increases,the processing of flexible board and rigid-flex PCB is simplified,and the product yield increases by at least 8%. |
| |
| Keywords: | rigid-flex flexible board prepreg partly embedded printed circuit board(PCB) |
| 本文献已被 CNKI 等数据库收录！ |
|
