| 激光填丝焊接焊缝成形质量控制系统研究 |
| |
| 引用本文： | 杨文广,刘春,陈武柱,张旭东. 激光填丝焊接焊缝成形质量控制系统研究[J]. 激光技术, 2003, 27(3): 193-196 |
| |
| 作者姓名： | 杨文广 刘春 陈武柱 张旭东 |
| |
| 作者单位： | 1.清华大学机械工程系, 北京, 100084 |
| |
| 基金项目： | 国家自然科学基金，973国家重点基础研究规划资助项目 |
| |
| 摘 要： | 研究了激光填丝焊接中相关的工艺参数对焊缝成形质量的影响。比较了对接间隙宽度发生变化时控制送丝速度或焊接速度两种情况下获得焊缝成形的质量。结果表明,间隙较小时调节送丝速度较好,间隙宽度较大时则调节焊接速度为佳。针对高精度焊接条件下焊缝成形质量控制要求,设计了一套以80c51单片机为核心的双单片机系统,该系统在焊接过程中可根据坡口间隙宽度选择性地实时调节送丝速度或焊接速度,以保证激光填丝焊接全过程获得良好的焊缝成形质量。
|
| 关 键 词： | 激光填丝焊接 焊缝成形质量 双单片机系统 |
| 文章编号： | 1001-3806(2003)03-0193-04 |
| 收稿时间： | 2002-07-22 |
| 修稿时间： | 2002-07-22 |
Study on the control system for the weld appearance quality during laser welding with filler wire |
| |
| Yang Wenguang,Liu Chun,Chen Wuzhu,Zhang Xudong. Study on the control system for the weld appearance quality during laser welding with filler wire[J]. Laser Technology, 2003, 27(3): 193-196 |
| |
| Authors: | Yang Wenguang Liu Chun Chen Wuzhu Zhang Xudong |
| |
| Abstract: | The effect of the parameters on weld appearance quality during laser welding with filler wire is studied in the article. The appearance quality obtained by controlling the wire feeding speed is compared with that obtained by controlling welding speed during laser welding with variable gap-width.The result shows that it is better to control wire feeding speed for narrower gap-width,otherwise it is better to control welding speed for wider gap-width. To meet the weld appearance quality requirement during high accuracy welding process,the double MCU system based on 80c51 is developed,which can adjust the welding parameters by gap-width during welding process to assure benign weld appearance quality during laser welding with filler wire. |
| |
| Keywords: | laser welding with filler wire weld appearance quality double MCU system |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
| 点击此处可从《激光技术》浏览原始摘要信息 |
|
点击此处可从《激光技术》下载免费的PDF全文 |
|
