| HTR-10高温气冷堆一回路电气贯穿件的研制 |
| |
| 引用本文： | 周惠忠,向林,洪玉生. HTR-10高温气冷堆一回路电气贯穿件的研制[J]. 高技术通讯, 2005, 15(1): 54-57 |
| |
| 作者姓名： | 周惠忠 向林 洪玉生 |
| |
| 作者单位： | 清华大学核能技术设计研究院,北京,100084;上海核工程研究设计院,上海,200233 |
| |
| 基金项目： | 863计划 (2 0 0 1AA5 110 2 0 )资助项目 |
| |
| 摘 要： | 研制HTR 10高温气冷堆一回路电气贯穿件。与压水堆安全壳上使用的电气贯穿件相比 ,HTR 10高温气冷堆一回路压力边界上的电气贯穿件要求更高 :密封介质是氦气 ,密封压力更高。根据功能要求 ,本电气贯穿件的技术特点是采取了陶瓷组件封焊和钢管聚砜旋锻密封两种密封方法 ,以及紧凑的结构方式。经过了严格的型式试验研制成样机 ,电气贯穿件在HTR 10高温气冷堆一回路压力边界上得到应用
|
| 关 键 词： | 高温气冷堆 一回路 电气贯穿件 |
| 修稿时间： | 2004-04-14 |
Development of Electrical Penetration Assemblies for Primary System of HTR-10 |
| |
| Zhou Huizhong,Xian Ling,Hong Yusheng. Development of Electrical Penetration Assemblies for Primary System of HTR-10[J]. High Technology Letters, 2005, 15(1): 54-57 |
| |
| Authors: | Zhou Huizhong Xian Ling Hong Yusheng |
| |
| Abstract: | The electrical penetration assemblies for the primary system pressure boundary of the HTR 10 are developed, the technical requirements of which are higher than those for containments of PWRs. According to the functional requirements, their technical characteristics consist of two ways on seal, ceramic package seal weld and tube polysulfone whirl forge seal, and the compact structure. Prototypes have undergone a series of rigorous model tests. Many electrical penetration assemblies are used on the primary system pressure boundary of the HTR 10. |
| |
| Keywords: | high temperature gas cooled reactor primary system electrical penetration assembly |
| 本文献已被 CNKI 万方数据 等数据库收录！ |
|
