首页 | 本学科首页   官方微博 | 高级检索  
     

变片距换热器空气源热泵机组结霜特性分析
引用本文:饶伟,陆亚俊.变片距换热器空气源热泵机组结霜特性分析[J].哈尔滨工业大学学报,2007,39(10):1596-1600.
作者姓名:饶伟  陆亚俊
作者单位:哈尔滨工业大学,市政与环境工程学院,哈尔滨,150090
摘    要:为了比较变片距与等片距室外换热器空气源热泵冷热水机组的性能,在质量守恒、能量守恒的条件下建立系统动态模型,利用数值模拟对变片距与传统换热器的空气源热泵运行特性比较.仿真结果表明,在入口空气参数和初始蒸发温度相同的条件下,变片距换热器空气源热泵机组运行时蒸发温度、冷凝温度、制冷剂流量、水侧换热量、出水温度均大于等片距换热器空气源热泵机组,从而使得机组供热性能系数提高,并有效延长了换热器结霜周期.

关 键 词:空气源热泵  变片距  系统动态模型  结霜
文章编号:0367-6234(2007)10-1596-05
修稿时间:2006-02-20

Characteristic analysis on air source heat pump with variable spacing fin heat exchanger in frosting condition
RAO Wei,LU Ya-jun.Characteristic analysis on air source heat pump with variable spacing fin heat exchanger in frosting condition[J].Journal of Harbin Institute of Technology,2007,39(10):1596-1600.
Authors:RAO Wei  LU Ya-jun
Affiliation:School of Municipal and Environmental Engineering, Harbin Institute of Technology, Harbin 150090, China
Abstract:Aiming at comparing performance of air source heat pump with variable spacing fin heat exchanger and constant spacing fin heat exchanger,a dynamic mathematic model was founded based on mass and energy conservation.The variable and constant spacing fin heat exchangers' system performance was compared by numerical simulation.The simulation results showed that COP of heat pump with variable spacing fin heat exchanger is higher than heat pump with constant spacing fin heat exchanger under the same air input parameter and initial evaporating temperature,and the variable spacing fin heat exchanger delays frost.
Keywords:air source heat pump  variable fin spacing system dynamic model  frosting
本文献已被 CNKI 维普 万方数据 等数据库收录!
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号