首页 | 本学科首页   官方微博 | 高级检索  
     

中厚板熔化极气体保护焊的数值模拟及实验验证
引用本文:郑振太,单平,胡绳荪,黄振华. 中厚板熔化极气体保护焊的数值模拟及实验验证[J]. 中国机械工程, 2007, 18(11): 1366-1369
作者姓名:郑振太  单平  胡绳荪  黄振华
作者单位:1. 河北工业大学,天津,300130
2. 中国石油辽河石油勘探局,辽宁,121209
摘    要:在建立中厚板GMAW温度场数值仿真模型的基础上,用ANSYS进行了数值模拟,并通过红外热像仪进行了实验验证。实验结果与模拟结果对比分析表明,温度场热循环曲线的形状、峰值温度及加热速度比较接近实测数值,冷却区段偏差稍大,证明所建立的数值仿真模型可以较好地模拟中厚板GMAW的温度场,为应力应变分析等其他焊接过程的数值分析打下了良好的基础。

关 键 词:熔化极气体保护焊  多层焊  温度场  数值模拟  热源模型
文章编号:1004-132X(2007)11-1366-04
修稿时间:2006-03-23

Experimental Verification and Numerical Simulation of the Medium Plate with Gas Metal Arc Welding(GMAW)
Zheng Zhentai,Shan Ping,Hu Shengsun,Huang Zhenhua. Experimental Verification and Numerical Simulation of the Medium Plate with Gas Metal Arc Welding(GMAW)[J]. China Mechanical Engineering, 2007, 18(11): 1366-1369
Authors:Zheng Zhentai  Shan Ping  Hu Shengsun  Huang Zhenhua
Affiliation:1. Hebei University of Technology, Tianjin, 300130 2. Tianjin University, Tianjin, 300072 3. Liaohe Petroleum Exploration Bureau Petrochina, Liaoning, 121209
Abstract:Based on the numerical simulation a model about GMAW temperature field of medium plate was established, and simulated by the software ANSYS and was verified by IR camera. Comparing experimental results and simulation results it shows that the shape of thermal cycle curve, the peak value of temperature and the rate of heating are very close to the measured values other than a little deviation of cooling sector. So it can be concluded that the established numerical simulation model is feasible for simulating the GMAW temperature field of medium plate, and makes a good foundation for stress--strain analysis and numerical analysis of the other welding process.
Keywords:gas metal arc welding(GMAW)  multilayer welding  temperature field  numerical simulation  heat-source model
本文献已被 CNKI 维普 万方数据 等数据库收录!
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号