The design of blank’s initial shape in the near net-shape deep drawing of square cup |
| |
Authors: | T S Yang R F Shyu |
| |
Affiliation: | 1. Department of Mechanical and Computer-Aided Engineering, National Formosa University, Taiwan
|
| |
Abstract: | Deep drawing process is very useful in industrial field because of its efficiency. The deep drawing is affected by many process variables, such as blank shapes, profile radii of punch and die, formability of materials and so on. Especially, in order to obtain the optimal products in deep drawing process, blank shape is very important formability factor. In this paper, the finite element method is used to investigate the cup height of the square cup drawing process. In order to verify the prediction of FEM simulation of the product’s height and forming load in the square cup drawing process, the experimental data are compared with the results of the current simulation. A finite element analysis is also utilized to acquire the designed profile of the drawn products, a reverse forming method for obtaining the initial blank’s shape according to the forward square cup drawing simulation is proposed. The design of initial blank’s shape is also certified to obtain the designed profile of drawn cups by experiment. The influences of the blank’s shape on the height of product, the forming load, the maximum effective stress and the maximum effective strain are also examined. |
| |
Keywords: | |
本文献已被 SpringerLink 等数据库收录! |
|