| 斜孔钻模测量工艺孔的稳健位置 |
| |
| 引用本文： | 郭惠昕,蔡悦华,张世安.斜孔钻模测量工艺孔的稳健位置[J].机械工程师,2001(4):36-37. |
| |
| 作者姓名： | 郭惠昕 蔡悦华 张世安 |
| |
| 作者单位： | 常德师范学院机械工程系, |
| |
| 摘 要： | 应用稳健设计原理，对斜孔钻模测量工艺孔的位置设计进行了分析，理论分析表明其位置尺寸对夹具精度和夹具设计的稳健性有重要影响，进而提出了确定工艺孔位置尺寸的具体方法。
|
| 关 键 词： | 夹具 测量工艺孔 位置尺寸 稳健设计 |
| 文章编号： | 1002-2333(2001)04-0036-02 |
| 修稿时间： | 2000年10月8日 |
Robust position of the measuring technical hole at the fixture for drilling inclined hole |
| |
| GUO Hni-xin,CAI Yue-hua,ZHANG Si-an.Robust position of the measuring technical hole at the fixture for drilling inclined hole[J].Mechanical Engineer,2001(4):36-37. |
| |
| Authors: | GUO Hni-xin CAI Yue-hua ZHANG Si-an |
| |
| Abstract: | With the principle of robust design used, the position design of the measuring technical hole at the fixture for drilling inclined hole is analyzed in this paper. It is made dear that its position dimension has important impact on the precision and design robustness of the fixture. Then the method for determining the position dimension of the technical hole is put forward. |
| |
| Keywords: | fixture measuring technical hole position dimension robust design |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
