| 一种用于高精度电流型DAC的输出级设计 |
| |
| 引用本文： | 朱卓娅,程剑平,魏同立. 一种用于高精度电流型DAC的输出级设计[J]. 电路与系统学报, 2005, 10(3): 145-148 |
| |
| 作者姓名： | 朱卓娅 程剑平 魏同立 |
| |
| 作者单位： | 东南大学,微电子中心,江苏,南京,210096 |
| |
| 摘 要： | 提出了一种应用于电流型数模转换器(DAC)的输出电路。在对输出级的功能和稳定性作了分析计算后，设计了一种高增益、低失真的运放(OP)电路。运放模拟的直流增益为108dB，环路带宽为30MHz，环路相位裕量为60度，在输出为1rms时，THD N可达到104．8dB。和传统的开关电容(SC)输出级相比，该电路具有面积小、噪声低等优点，可应用于高精度的电流型DAC。
|
| 关 键 词： | 输出级 运放电路 数模转换器 电流型DAC |
| 文章编号： | 1007-0249(2005)03-0145-04 |
| 修稿时间： | 2004-12-13 |
Design of output circuit for high precision current-steering DAC |
| |
| ZHU Zhuo-ya,CHENG Jian-ping,WEI Tong-li. Design of output circuit for high precision current-steering DAC[J]. Journal of Circuits and Systems, 2005, 10(3): 145-148 |
| |
| Authors: | ZHU Zhuo-ya CHENG Jian-ping WEI Tong-li |
| |
| Abstract: | An output circuit used in current-steering digital to analog converter (DAC) is proposed. On the basis of analysis of the output stage function and stability, an operational amplifier (OP) with high gain and low distortion is designed. Simulation results of OP show that dc gain is 108dB, loop bandwidth is 30MHz, loop phase margin is 60 degree and THD+N is 104.8dB at 1rms output. Compared to the conventional switch capacity (SC) output stage, this output circuit has smaller area and lower noise, so it is a promising alternative in the high precision current-steering DAC. |
| |
| Keywords: | output stage operational amplifier digital to analog converter: current-steering DAC |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
|
