| 基于COM技术和OPC规范的开放式结构数控系统研究 |
| |
| 引用本文： | 李斌,周云飞,唐小琦.基于COM技术和OPC规范的开放式结构数控系统研究[J].中国机械工程,2003,14(4):312-315. |
| |
| 作者姓名： | 李斌 周云飞 唐小琦 |
| |
| 作者单位： | 1. 华中科技大学,武汉市,430074
2. 华中科技大学国家数控系统工程技术研究中心 |
| |
| 基金项目： | 国家科技攻关计划资助项目 (2 0 0 1 BA1 1 1 C) |
| |
| 摘 要： | 对COM技术和OPC规范进行简要介绍后，指出基于COM技术/OPC规范的开放式数控系统的优势所在。提出了开放式结构数控系统的层次模型和工作流程。并以此为基础。研究了一个实例系统的软硬个结构。该实例的硬件采用自行开发的DSP运动控制卡，软件采用COM技术，硬件驱动程序符合OPC规范。
|
| 关 键 词： | COM OPC 开放式结构 数控系统 运动控制卡 |
| 文章编号： | 1004-132X(2003)04-0312-04 |
Research on Open Architecture CNC System Based on COM Technology and OPC Specification |
| |
| Li Bin.Research on Open Architecture CNC System Based on COM Technology and OPC Specification[J].China Mechanical Engineering,2003,14(4):312-315. |
| |
| Authors: | Li Bin |
| |
| Abstract: | After brief introduction to COM technology and OPC specification, the advantages of open architecture CNC system that is based on COM and OPC are described in this paper. A hierarchical model and workflow of the open architecture CNC system are presented. According to this model and workflow, the software and hardware architectures of an example system are studied. The hardware of the example adopts DSP motion control card self-developed, the software architecture uses COM technology, and the hardware driver program conforms to OPC specification. |
| |
| Keywords: | COM OPC open architecture CNC system motion control card |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
