| 基于Pro/E的圆柱凸轮机构设计与运动仿真 |
| |
| 引用本文： | 吕长生,姜大成,杨培滋,王佳峰.基于Pro/E的圆柱凸轮机构设计与运动仿真[J].机械研究与应用,2009,22(2):96-98. |
| |
| 作者姓名： | 吕长生 姜大成 杨培滋 王佳峰 |
| |
| 作者单位： | 陆航驻哈尔滨地区代表室,哈尔滨,黑龙江,150066 |
| |
| 摘 要： | 圆柱凸轮是槽形凸轮的一种,由于本身造型的独特性,在机械的传动机构中应用非常广泛。采用圆柱凸轮的图解法设计原理,在Pro/E中应用二次投影成型法完成圆柱凸轮槽轮廓的参数化设计。采用该设计方法可生成凸轮的三维实体上带有凸轮槽的轮廓曲线,为在Mechanism模块中进行运动仿真时定义凸轮槽从动机构连接提供方便,通过运动仿真和测量结果验证,可提高机构设计的精确性和可靠性。
|
| 关 键 词： | 凸轮机构 图解法 Pro/E 二次投影成型法 运动仿真 |
Design and motion simulation of the cylindrical cam based on Pro/E |
| |
| Lv Chang-sheng,Jiang Da-cheng,Yang Pei-zi,Wang Jia-feng.Design and motion simulation of the cylindrical cam based on Pro/E[J].Mechanical Research & Application,2009,22(2):96-98. |
| |
| Authors: | Lv Chang-sheng Jiang Da-cheng Yang Pei-zi Wang Jia-feng |
| |
| Affiliation: | Customer representative of general staff department in Harbin district;Harbin Heilongjiang 150066;China |
| |
| Abstract: | Columniform cam is a kind of groovy cam,as its particular formative design,its application is highly broad in transmission machine.The graphical method principle on columniform cam and quadratic projection molding method in Pro/E is adopted,references design of cam slot profile have been competed.By using the design method,the slot profile curve of three-dimensional solid is created and it can provide convenicence for defining cam slot mechanisam as simulating in mechanism module.The design method can impro... |
| |
| Keywords: | Pro/E |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
|
