| 网络控制系统的增广状态极点配置设计法 |
| |
| 引用本文： | 关守平,孙兰香.网络控制系统的增广状态极点配置设计法[J].信息与控制,2005,34(4):407-411. |
| |
| 作者姓名： | 关守平 孙兰香 |
| |
| 作者单位： | 东北大学教育部暨辽宁省流程工业综合自动化重点实验室,辽宁,沈阳,110004 |
| |
| 摘 要： | 参数时变系统可以通过增广状态法转换成一种标准形式．本文应用极点配置设计法，设计了基于网络控制系统标准形式模型的控制规律和观测器，并证明了分离定理仍然成立．仿真研究表明该设计方法应用到网络控制系统的有效性．
|
| 关 键 词： | 网络控制系统 极点配置 增广状态模型 |
| 文章编号： | 1002-0411（2005）04-0407-05 |
| 收稿时间： | 2005-01-20 |
| 修稿时间： | 2005-01-20 |
Design of Pole-placement Based on Augmented State of Networked Control Systems |
| |
| GUAN Shou-ping,SUN Lan-xiang.Design of Pole-placement Based on Augmented State of Networked Control Systems[J].Information and Control,2005,34(4):407-411. |
| |
| Authors: | GUAN Shou-ping SUN Lan-xiang |
| |
| Abstract: | The time-varying systems can be described by a uniform model based on augmented state. Applying the pole-placement method, the control law and the state observer are exploited based on the uniform model of the networked control systems (NCS). Meanwhile, the separation principle is proved to be valid in the controller of the NCS. Simulation results show the effectiveness of the controller design method to the NCS. |
| |
| Keywords: | networked control system pole-placement augmented state model |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
| 点击此处可从《信息与控制》浏览原始摘要信息 |
|
点击此处可从《信息与控制》下载全文 |
