| 激光熔凝的数值模拟及其在激光定向凝固中的应用 |
| |
| 引用本文： | 刘振侠,黄卫东,杨森. 激光熔凝的数值模拟及其在激光定向凝固中的应用[J]. 中国有色金属学报, 2002, 12(3): 458-463 |
| |
| 作者姓名： | 刘振侠 黄卫东 杨森 |
| |
| 作者单位： | 西北工业大学,凝固技术国家重点实验室,西安,710072 |
| |
| 基金项目： | 国家重点基础研究发展规划项目（G200067205-3）；航空基金资助项目（97z53002) |
| |
| 摘 要： | 建立了一套激光熔凝的数学模型和计算方法 ,给出了两种条件下熔池深度与扫描速度的关系曲线。计算结果与实验值吻合良好 ,验证了模型的有效性。根据计算分析了激光工艺参数与激光定向凝固组织的关系。据此通过工艺参数的匹配 ,在熔池顶部得到了与扫描方向完全一致的凝固组织
|
| 关 键 词： | 激光熔凝 数值模拟 定向凝固 |
| 文章编号： | 1004-0609(2002)03-0458-06 |
| 修稿时间： | 2001-07-16 |
Numerical simulation of laser surface re-melting and its use in laser directional solidification |
| |
| LIU Zhen-xia,HUANG Wei-dong,YANG Sen. Numerical simulation of laser surface re-melting and its use in laser directional solidification[J]. The Chinese Journal of Nonferrous Metals, 2002, 12(3): 458-463 |
| |
| Authors: | LIU Zhen-xia HUANG Wei-dong YANG Sen |
| |
| Abstract: | A model and a numerical method of laser surface re-melting were established. The relationship between the depth of laser melted pools and the laser scanning velocity was calculated for two base materials. The calculations agree with the experiments well, and these validate the model. The relationship between the laser processing parameters and laser directional solidification morphology was analyzed by the model. Based on the model, the morphology with the growth direction same with scanning direction was obtained at the top of the melting pool through the match among the processing parameters. |
| |
| Keywords: | laser re-melting numerical simulation directional solidification |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
