| 车用发电机的模态分析 |
| |
| 引用本文： | 尚修敏,闫兵,董大伟,张胜杰.车用发电机的模态分析[J].噪声与振动控制,2013,33(6):110-114. |
| |
| 作者姓名： | 尚修敏 闫兵 董大伟 张胜杰 |
| |
| 作者单位： | （ 1. 西南交通大学 机械工程学院， 成都 610031；2. 成都华川电装有限责任公司， 成都 610106 ） |
| |
| 摘 要： | 针对电磁共振引起的车用发电机在低速段噪声超标问题，对发电机振动模态通过仿真和实验对比的方法进行分析。材料参数通过零部件自由状态下有限元仿真结果和试验结果对比进行校准，约束状态下整机模型仿真结果与整机模态试验结果趋于一致，最后对发电机端盖结构改进实现降噪亦证实噪声超标原因。
|
| 关 键 词： | 振动与波 发电机 电磁共振 模态试验 仿真 |
| 收稿时间： | 2012-12-11 |
Modal Analysis of Vehicle Alternator |
| |
| SHANG Xiu-min,YAN Bing,DONG Da-wei,ZHANG Sheng-jie.Modal Analysis of Vehicle Alternator[J].Noise and Vibration Control,2013,33(6):110-114. |
| |
| Authors: | SHANG Xiu-min YAN Bing DONG Da-wei ZHANG Sheng-jie |
| |
| Affiliation: | 1. School of Mechanical Engineering, Southwest Jiaotong University, Chengdu 610031, China; 2. Chengdu Huachuan Electric Parts Co., Ltd., Chengdu 610106, China ) |
| |
| Abstract: | Aiming at the problem of overlarge noise of vehicle＇ s alternators in low speed range caused by electromagnetic resonance, the vibration modes of an alternator was studied by finite element simulation and experimental testing. The material parameters were calibrated through comparison of the simulation results with the testing data of the component parts of the alternator in free status. The simulation results of alternator＇ s modes in constrained state were in a good agreement with the test results. Finally, the alternator covers were improved to reduce the noise, which also confirmed the reason of the overlarge noise. |
| |
| Keywords: | vibration and wave alternator electromagnetic resonance modal test simulation |
| 本文献已被 维普 等数据库收录！ |
| 点击此处可从《噪声与振动控制》浏览原始摘要信息 |
|
点击此处可从《噪声与振动控制》下载全文 |
|
