| 发动机叶片电解加工变间隙阴极修正法 |
| |
| 引用本文： | 徐正扬,朱荻,朱栋.发动机叶片电解加工变间隙阴极修正法[J].机械工程学报,2009,45(9):187-192. |
| |
| 作者姓名： | 徐正扬 朱荻 朱栋 |
| |
| 作者单位： | 南京航空航天大学江苏省精密与微细制造技术重点实验室 |
| |
| 基金项目： | 高等学校博士学科点专项科研基金，航空科学基金 |
| |
| 摘 要： | 为了提高叶片电解加工的精度，提出变间隙阴极修正方法，建立该方法数学模型，分析加工间隙与阴极修正量的对应关系，通过在型面误差中代入间隙补偿量来修正阴极。提出阴极沿型线修正量的计算公式和插值逼近的试验方法。结合自行研制的新型叶片电解加工机床，进行了叶片电解加工阴极修正的试验，通过变间隙修正方法修改阴极。试验过程中阴极经过3次计算机修正，可使叶片电解加工精度提高到0.05 mm，表明该阴极修正方法合理有效，数学模型与试验情况吻合。
|
| 关 键 词： | 电解加工 发动机叶片 阴极修正 |
Variable Gap Amendment of Cathode for the Electrochemical Machining of Turbine Blade |
| |
| XU Zhengyang,ZHU Di,ZHU Dong.Variable Gap Amendment of Cathode for the Electrochemical Machining of Turbine Blade[J].Chinese Journal of Mechanical Engineering,2009,45(9):187-192. |
| |
| Authors: | XU Zhengyang ZHU Di ZHU Dong |
| |
| Affiliation: | Jiangsu Key Laboratory of Precision and Micro-manufacturing Technology, Nanjing University of Aeronautics and Astronautics |
| |
| Abstract: | For improving the accuracy of blade electrochemical machining(ECM),the variable gap amendment method of cathode is proposed and a mathematical model of this method is presented.The correction data of cathode are variable based on the value of interelectrode gap and are used to the cathode design.The approximate formula of cathode correction data which are calculated along the contours line is given and the experimental method of interpolation approximation is adopted.The experimental investigations are carr... |
| |
| Keywords: | Cathode amendment Electrochemical machining(ECM) Turbine blade |
| 本文献已被 CNKI 万方数据 等数据库收录！ |
| 点击此处可从《机械工程学报》浏览原始摘要信息 |
|
点击此处可从《机械工程学报》下载全文 |
