首页 | 本学科首页   官方微博 | 高级检索  
     

断路器均压电容爆炸原因的仿真分析与研究
引用本文:周莉,童雪芳,文习山,鲁海亮.断路器均压电容爆炸原因的仿真分析与研究[J].高电压技术,2005,31(9):34-37.
作者姓名:周莉  童雪芳  文习山  鲁海亮
作者单位:柳州运输职业技术学院,柳州545007;武汉大学电气工程学院,武汉430072
摘    要:用ATP仿真程序模拟了某断路器均压电容器正常操作时爆炸的过程以确定故障原因。断路器重燃过程和电容器击穿过程的模拟通过自动暂态控制开关(TACS)编程实现,3种故障原因的仿真波形图与故障录波图吻合,从而确定故障的真正原因是并联均压电容本身的绝缘缺陷未能承受正常的操作过电压而多次击穿。

关 键 词:均压电容器  爆炸  ATP仿真  重燃
文章编号:1003-6520(2005)09-0034-04
收稿时间:2005-05-20
修稿时间:2005年5月20日

Simulation Analysis of the Reason for the Explosion of the Breaker Grading Capacitor
ZHOU Li,TONG Xuefang,WEN Xishan,LU Hailiang.Simulation Analysis of the Reason for the Explosion of the Breaker Grading Capacitor[J].High Voltage Engineering,2005,31(9):34-37.
Authors:ZHOU Li  TONG Xuefang  WEN Xishan  LU Hailiang
Affiliation:1. Vocation and Technology School of Liuzhou, Liouzhou 545007, China; 2. Electrical Engineering School of Wuhan University, Wuhan 430072, China
Abstract:Aiming at the explosion accident of breaker grading capacitor in a substation under the normal operations, the method using ATP program to simulate this procession order to confirm the fault cause is presented. By programming based on the TACS, the simulation of the process of the breakers restrike and the process of the breakdown of capacitors is carried out. Three kinds of possible fault cause brought forward in the paper are simulated respectively, and the results which are consistent with recorded fault waveforms are obtained. Consequently the real reason of this accident is found. It is that the grading capacitors insulation had defect and it can not endure the normal switching overvohage.
Keywords:grading capacitor  explosion  ATP simulation  restrike
本文献已被 CNKI 维普 万方数据 等数据库收录!
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号