Abstract: | Two- and three-layer composite latex particles were used to prepare rubber-toughened poly(methyl methacrylate) (RT-PMMA). The interfacial thicknesses of the multi-layered particles were varied by using different emulsion polymerization synthesis techniques. The resulting interphases were previously characterized by 13C nuclear magnetic resonance techniques. The poly(divinyl benzene)/poly(butyl acrylate) (PDVB/PBA) interphase thickness was found to be in the range of 5–7 nm. It was also found that the PBA/PMMA interphase thickness could be varied from 5 to 7 nm (batch addition of MMA) to 15 to 17 nm (interphase compatibilized with PMMA macromonomer). The interphase thickness was expected to play an important role in the mechanical behavior of PMMA. The effect of the interphase of two- and three-layer particles on the tensile and fracture behavior of PMMA composites was evaluated. The fracture surfaces were examined by scanning electron microscopy. The two-layer PBA/PMMA particles with a thicker interphase (15–17 nm) exhibited higher KIC values with the PMMA composites compared with PBA/PMMA particles with a thinner interphase (5–7 nm). The three-layer particles were found to be more effective in toughening PMMA compared with the two-layer particles. The differences in toughening behavior are speculated to arise from the morphological effects caused by a thicker interphase, which in turn results in better coverage by the PMMA shell and a more uniform distribution of the toughening particles in the PMMA matrix. © 1997 John Wiley & Sons, Inc. J Appl Polym Sci 65:581–593, 1997 |