| 基于Moldflow的洗衣机控制面板注射模浇口位置优化设计 |
| |
| 引用本文： | 辛然然,张慧敏.基于Moldflow的洗衣机控制面板注射模浇口位置优化设计[J].塑料制造,2013(12):73-74. |
| |
| 作者姓名： | 辛然然 张慧敏 |
| |
| 作者单位： | 青岛科技大学,山东青岛266000 |
| |
| 摘 要： | 针对浇口位置及数量对于注塑模塑料制品设计中的重要性，运用Moldflow软件对不同浇口位置及浇口数量的熔接痕、流动前沿处温度、翘曲分析进行分析比较，确定浇口位置的优化分案，提高模具的设计效率。
|
| 关 键 词： | Moldflow 浇口 熔接痕 流动前沿处温度 翘曲 |
Optimization Design of Injection Mold Gate for the Washing Machine Control Pane Based on Moldflow |
| |
| Xin Ranran,Zhang Huimin.Optimization Design of Injection Mold Gate for the Washing Machine Control Pane Based on Moldflow[J].Plastics Manufacture,2013(12):73-74. |
| |
| Authors: | Xin Ranran Zhang Huimin |
| |
| Affiliation: | (Qingdao University of Science and Technology, Qingdao Shandong, 266000 ) |
| |
| Abstract: | In the view of the importance of gate location and number for in the design of injection molding plastic products. Moldflow software was applied to make analysis and comparison of various gate locations at plastic parts in terms of their weld lines, the temperature at flow front, warpage analysis, and an optimized gate was obtained. Improve the efficiency of mold design. |
| |
| Keywords: | Moldflow gate weld lines the temperature at flow front warpage |
| 本文献已被 维普 等数据库收录！ |
