| 有机泡沫浸渍工艺制备生物挂膜载体泡沫陶瓷 |
| |
| 引用本文： | 周梅,邹正光,龙飞.有机泡沫浸渍工艺制备生物挂膜载体泡沫陶瓷[J].桂林工学院学报,2009,29(3):331-333. |
| |
| 作者姓名： | 周梅 邹正光 龙飞 |
| |
| 作者单位： | 桂林理工大学,有色金属及材料加工新技术教育部重点实验室,广西,桂林,541004 |
| |
| 基金项目： | 教育部科学研究重点项目，广西区教育厅科研项目 |
| |
| 摘 要： | 以粘土为原料,采用有机泡沫浸渍工艺,制备了生物载体用泡沫陶瓷。研究了硅溶胶的加入量对浆料粘度值及泡沫陶瓷抗压强度的影响,浆料固含量对烧成泡沫陶瓷的气孔率、抗压强度和外观形貌等性能的影响。结果表明：浆料中加入质量分数为1.5%左右的硅溶胶、浆料固含量为65%时,制备的泡沫陶瓷的抗压强度约为2.5 MPa,气孔率约为85%,综合性能最优。
|
| 关 键 词： | 泡沫陶瓷 有机泡沫浸渍 粘土 生物载体 |
Preparation of Foam Ceramics for Organism Carrier by Polymeric Foam Replication |
| |
| ZHOU Mei,ZOU Zheng-guang,LONG Fei.Preparation of Foam Ceramics for Organism Carrier by Polymeric Foam Replication[J].Journal of Guilin University of Technology,2009,29(3):331-333. |
| |
| Authors: | ZHOU Mei ZOU Zheng-guang LONG Fei |
| |
| Affiliation: | ZHOU Mei,ZOU Zheng-guang,LONG Fei(Key Laboratory of New Processing Technology for Nonferrous Metals and Materials,Ministry of Education,Guilin University of Technology,Guilin 541004,China) |
| |
| Abstract: | Foam ceramics for organism carrier are made from clay by polymeric foam replication.The effect of silicasol content on the slurry character or the compression strength of the foam ceramics and the effect of the slurry solids-content on foam ceramic porosity and compression strength and the appearance with the solids-content of the slurry are researched.The foam ceramic porosity is 85% and compression strength is 2.5 MPa when the silicasol content is about 1.5% and solids-content 65%. |
| |
| Keywords: | foam ceramic polymeric foam replication clay organism carrier |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
|
