| 摆辗机机身有限元分析 |
| |
| 引用本文： | 卢志国,程培元,华林.摆辗机机身有限元分析[J].锻压装备与制造技术,2007,42(4):32-34. |
| |
| 作者姓名： | 卢志国 程培元 华林 |
| |
| 作者单位： | 武汉理工大学,材料科学与工程学院,湖北,武汉,430070;武汉理工大学,材料科学与工程学院,湖北,武汉,430070;武汉理工大学,材料科学与工程学院,湖北,武汉,430070 |
| |
| 摘 要： | 利用有限元软件对2000kN摆辗机机身进行了有限元分析.先对摆辗机结构进行分析,并用UG软件建立简化模型,然后将模型导入有限元分析软件ANSYS中.研究结果对优化摆辗机结构参数、提高摆辗机强度和刚度、合理设计摆辗工艺和合理确定工件尺寸补偿量具有指导意义.
|
| 关 键 词： | 机床技术 结构设计 摆辗机 有限元分析 |
| 文章编号： | 1672-0121（2007）04-0032-03 |
| 修稿时间： | 2007-05-20 |
Finite Element Analysis for the Frame of the Rotary Forging Machine |
| |
| LU Zhiguo,CHENG Peiyuan,HUA Lin.Finite Element Analysis for the Frame of the Rotary Forging Machine[J].China Metalforming Equipment & Manufacturing Technology,2007,42(4):32-34. |
| |
| Authors: | LU Zhiguo CHENG Peiyuan HUA Lin |
| |
| Abstract: | Finite element analysis on the frame of the rotary forging machine has been carried on.First the frame of the machine has been analyzed mechanically,then the simplified model of the machine has been built in UG software and imported into the finite element software ANSYS to carry on the analysis. The results are useful for optimizing the structural design and enhancing the strength and stiffness of the machine,which has directive effect for designing rotary forging process and choosing the reasonable compensation value. |
| |
| Keywords: | Structural design Rotary forging machine Finite element analysis |
| 本文献已被 维普 万方数据 等数据库收录！ |
|
