| 夹杂物尺寸及位置对51CrV4弹簧钢疲劳寿命的影响 |
| |
| 引用本文： | 阙石生,梁益龙,赵飞.夹杂物尺寸及位置对51CrV4弹簧钢疲劳寿命的影响[J].机械工程材料,2011(7). |
| |
| 作者姓名： | 阙石生 梁益龙 赵飞 |
| |
| 作者单位： | 贵州大学材料与冶金学院贵州省材料结构与强度重点实验室; |
| |
| 基金项目： | 国家科技支撑计划项目(2007BAE11B03); 科技部科技人员服务企业行动项目(2009GJF20025); 贵州省科学技术基金资助项目(黔科合J字[2008]2209号) |
| |
| 摘 要： | 用能谱仪、扫描电镜分析了51CrV4弹簧钢的疲劳断口,研究了夹杂物尺寸及位置对该钢疲劳寿命的影响规律。结果表明:51CrV4试验钢的疲劳强度为702.5MPa,在保证试样表面没有划痕和麻点的情况下,疲劳裂纹主要起裂于椭球状且塑性较低的复杂氧化铝夹杂;在夹杂物尺寸越大和距离表面越近的情况下,其疲劳寿命越低;在710MPa应力水平下近表面夹杂物的临界尺寸为5.47μm。
|
| 关 键 词： | 弹簧钢 疲劳寿命 夹杂物尺寸 夹杂物位置 |
Influences of Inclusion Size and Position on Fatigue Life of 51CrV4 Spring Steel |
| |
| QUE Shi-sheng,LIANG Yi-long,ZHAO Fei.Influences of Inclusion Size and Position on Fatigue Life of 51CrV4 Spring Steel[J].Materials For Mechanical Engineering,2011(7). |
| |
| Authors: | QUE Shi-sheng LIANG Yi-long ZHAO Fei |
| |
| Affiliation: | QUE Shi-sheng,LIANG Yi-long,ZHAO Fei (Guizhou Key Laboratory for Mechanical Behavior and Microstructure of Materials,Materials and Metallurgical College,Guizhou University,Guiyang 550003,China) |
| |
| Abstract: | The fatigue fracture was analyzed with EDS and SEM.Influences of inclusion size and position on the fatigue life of 51CrV4 spring steel were studied.The results show that the fatigue strength of the steel was 702.5 MPa.Fatigue cracks originated from ellipsoidal and low plasticity alumina inclusions without scratches and pittings on the surface.The larger the inclusion size and the closer the inclusion position from the surface,the shorter the fatigue life.The critical size of surface inclusions was estimate... |
| |
| Keywords: | spring steel fatigue life inclusion size inclusion position |
| 本文献已被 CNKI 等数据库收录！ |
