| 齿轮钢20CrMoH脱硫的热力学研究 |
| |
| 引用本文： | 王郢,郭佳,杨文,景财良,王新华.齿轮钢20CrMoH脱硫的热力学研究[J].钢铁,2009,44(1):36-0. |
| |
| 作者姓名： | 王郢 郭佳 杨文 景财良 王新华 |
| |
| 作者单位： | 1.北京科技大学冶金与生态工程学院，北京 100083；2.北京科技大学材料科学与工程学院，北京 100083 |
| |
| 基金项目： | 973新一代钢铁材料重大基础研究资助项目(2004C13619106) |
| |
| 摘 要： | 采用LD LF RH CC的工艺路线，出钢采用Al脱氧，造高碱度低氧化性精炼渣，生产高品质汽车用齿轮钢20CrMoH。使用KTH模型和推导硫分配比公式对生产过程的硫容量和硫的分配比进行了计算，将预测与实测的硫分配比进行对比；并对整个精炼过程的脱硫效果进行了分析。
|
| 关 键 词： | 齿轮钢 脱硫 硫容量 硫分配比 |
Thermodynamics of Desulphurization of Gear Steel 20CrMoH |
| |
| WANG Ying,GUO Jia,YANG Wen,JING Cai-liang,WANG Xin-hua.Thermodynamics of Desulphurization of Gear Steel 20CrMoH[J].Iron & Steel,2009,44(1):36-0. |
| |
| Authors: | WANG Ying GUO Jia YANG Wen JING Cai-liang WANG Xin-hua |
| |
| Affiliation: | 1.Metallurgical and Ecological Engineering School, University of Science and Technology Beijing, Beijing 100083, China； 2.Material Science and Engineering School, University of Science and Technology Beijing, Beijing 100083, China |
| |
| Abstract: | Route of LD-LF-RH-CC is adopted to produce high quality gear steel 20CrMoH.During tapping,the bath is deoxidized by aluminium,and high basicity and low oxidability slag is made to refine the molten steel.The sulphide capacity and sulphur distribution of slag during were calculated using KTH model and Turkdogan's formula respectively,and then compared with measured values.The desulphurization efficiency during refining is analyzed. |
| |
| Keywords: | gear steel desulphurization sulphide capacity sulphur distribution |
| 本文献已被 CNKI 万方数据 等数据库收录！ |
| 点击此处可从《钢铁》浏览原始摘要信息 |
|
点击此处可从《钢铁》下载全文 |
