| 冷拔60Si2MnA弹簧钢制簧过程的断裂分析 |
| |
| 引用本文： | 曹杰,丁朝晖. 冷拔60Si2MnA弹簧钢制簧过程的断裂分析[J]. 特殊钢, 2015, 36(3): 46-48 |
| |
| 作者姓名： | 曹杰 丁朝晖 |
| |
| 作者单位： | 安徽工业大学冶金工程学院,马鞍山243002 |
| |
| 基金项目： | 安徽省自然科学研究项目资助(KJ2013A061) |
| |
| 摘 要： | Φ11.8mm冷拔60Si2MnA弹簧钢(/%:0.58C,1.77Si,0.79Mn,0.15Cr,0.015P,0.005S)的生产流程为80 t LD-LF-VD-热轧至Φ12 mm盘条-冷拔工艺。对卷簧时断裂弹簧进行金相、力学、组织分析表明,热轧材表面质量和冷拔后弹簧钢的力学性能良好,钢中存在20μm以上大颗粒非金属夹杂和冷拉过程产生的表面划痕是卷簧时弹簧断裂的诱因;控制钢中大颗粒夹杂物产生和改善冷拔润滑避免拔制过程产生深的划痕,可防止断裂发生。
|
| 关 键 词： | 60Si2MnA弹簧钢 卷簧断裂 夹杂物 表面质量 |
| 收稿时间： | 2015-01-15 |
Analysis on Fracture of Cold Drawn Spring Steel 60Si2MnA During Spring Manufacturing |
| |
| Cao Jie;Ding Zhaohui. Analysis on Fracture of Cold Drawn Spring Steel 60Si2MnA During Spring Manufacturing[J]. Special Steel, 2015, 36(3): 46-48 |
| |
| Authors: | Cao Jie Ding Zhaohui |
| |
| Affiliation: | School of Metallurgical Engineering, Anhui University of Technology, Ma' anshan 243002 |
| |
| Abstract: | The flowsheet of Φ11. 8 mm cold drawn spring steel (/% : 0. 58C, 1. 77Si, 0. 79Mn, 0. 15Cr, 0. 015P, 0. 005S) is 80 t LD-LF-VD-hot rolled Φ12 mm coil-cold drawing process. The metallographic, mechanical and structural analyses on fracture of spring during coiling spring show that the surface quality of hot rolled products and mechanical properties of cold drawn spring steel are better； the large nonmetallic inclusions with size more than 20 μm in steel and the surface scratch during cold drawing process are causes of fracture of spring during coiling manufacture; the control of large inclusions produced in steel and the improvement of cold drawing lubrication process to avoid deep scratch are available to prevent occurrence of fracture. |
| |
| Keywords: | |
| 本文献已被 CNKI 等数据库收录！ |
| 点击此处可从《特殊钢》浏览原始摘要信息 |
|
点击此处可从《特殊钢》下载全文 |
|
