| Abstract: | Methyl methacrylate was polymerized in an aqueous medium in the presence of gelatin using potassium persulfate as initiator. The dispersion mode of polymerization, when the monomer is completely miscible with water, was investigated and compared with an emulsion process, which proceeds at higher monomer concentration. Spherical and relatively uniform polymer particles were formed. Macroscopic precipitation of polymer is prevented by combination of the steric stabilization by grafted gelatin and of repulsive electrostatic interactions from the initiator residues attached to the particle surface. Static and dynamic light scattering have been used to determine the molar mass (molar mass of the whole dispersion particle, MwD ～ 108-109 g mol?1) and hydrodynamic radius (RhD ～ 50-120 nm) of the particles. The number of particles per unit volume does not depend on overall monomer concentration, and it is higher, and therefore the particle size is smaller, than that observed for the soapless emulsion polymerization. The addition of gelatin may be thus used to modify the particle size. Acrylonitrile dispersions were prepared under similar conditions. Unlike methyl methacrylate, this monomer does not swell the polymer particles. While poly(methyl methacrylate) particles are spherical and relatively uniform, the polyacrylonitrile dispersions consist of polydisperse aggregates of tiny polymer particles. |
