首页 | 本学科首页   官方微博 | 高级检索  
     

碳/环氧树脂复合材料吸湿水分浓度场的有限元分析
引用本文:孙丽,黄远,万怡灶,何芳,王玉林. 碳/环氧树脂复合材料吸湿水分浓度场的有限元分析[J]. 兵器材料科学与工程, 2007, 30(4): 5-8
作者姓名:孙丽  黄远  万怡灶  何芳  王玉林
作者单位:天津大学,材料科学与工程学院,天津,300072;天津大学,材料科学与工程学院,天津,300072;天津大学,材料科学与工程学院,天津,300072;天津大学,材料科学与工程学院,天津,300072;天津大学,材料科学与工程学院,天津,300072
基金项目:天津市科技发展技术重点攻关项目
摘    要:采用ABAQUS有限元软件的质量扩散模块,对碳纤维增强环氧树脂基(CFL/EP)复合材料在湿热环境下吸湿后的水分浓度场进行了分析计算。计算在环境温度T=37℃及T=80℃的条件下进行。计算结果和试验结果吻合得较好,为后续的CFL/EP复合材料湿热残余应力的分析打下了初步基础。

关 键 词:CFI/EP复合材料  ABAQUS有限元软件  质量扩散  吸湿
文章编号:1004-244X(2007)04-0005-04
修稿时间:2006-12-06

Finite element analysis of moisture distribution within carbon fiber reinforced epoxy composite
SUN Li,HUANG Yuan,WAN Yi-zao,HE Fang,WANG Yu-lin. Finite element analysis of moisture distribution within carbon fiber reinforced epoxy composite[J]. Ordnance Material Science and Engineering, 2007, 30(4): 5-8
Authors:SUN Li  HUANG Yuan  WAN Yi-zao  HE Fang  WANG Yu-lin
Affiliation:School of Material Science and Technology, Tianjin University, Tianjin 300072, China
Abstract:With the mass diffusion module of ABAQUS,the moisture absorption behavior of carbon fiber reinforced epoxy composite is investigated in this work.The simulation is carried out both at 37 ℃ and 80 ℃ and the results coincide well with experiment.Therefore,the residual stress in the CFL/EP composite can be studied on the basis of the above results.
Keywords:CF1/EP composite   ABAQUS finite element software   mass diffusion   water absorption
本文献已被 维普 万方数据 等数据库收录!
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号