| 采用SolidWorks API的离心式叶轮参数化建模 |
| |
| 引用本文： | 彭波,杨岳,苏春模.采用SolidWorks API的离心式叶轮参数化建模[J].工程图学学报,2009,30(5). |
| |
| 作者姓名： | 彭波 杨岳 苏春模 |
| |
| 作者单位： | 1. 中南大学交通运输工程学院,湖南,长沙,410075
2. 埃尔压缩机有限责任公司,湖南,长沙,410100 |
| |
| 摘 要： | 离心式叶轮是离心压缩机产品的核心零件,结构形状复杂,对其开展参数化建模研究可提升设计质量和效率.分析了三维CAD平台下离心式叶轮三维建模的一般步骤,构建了采用SolidWorks API的参数化建模方案.分别讨论了叶片、轮盘和轮盖的参数化建模实现原理.以Visual Basic为开发工具,在SolidWorks环境下实现了离心式叶轮的参数化自动建模.应用实例表明,在该软件支持下可高效地进行离心式叶轮的参数化设计与优化.
|
| 关 键 词： | 计算机应用 参数化建模 离心式叶轮 |
Parametric Modeling of Centrifugal Impeller Based on SolidWorks API |
| |
| PENG Bo,YANG Yue,SU Chun-mo.Parametric Modeling of Centrifugal Impeller Based on SolidWorks API[J].Journal of Engineering Graphics,2009,30(5). |
| |
| Authors: | PENG Bo YANG Yue SU Chun-mo |
| |
| Affiliation: | PENG Bo1,YANG Yue1,SU Chun-mo2(1.School of Traffic and Transportation Engineering,Central South University,Changsha Hunan 410075,China,2.Aerturbo Compressor Co.,LTD,Changsha Hunan 410100,China) |
| |
| Abstract: | Centrifugal impeller,which is the core component of centrifugal compressor,has complex shape.The design quality and efficiency can be enhanced through parametric modeling for this component.The general steps of modeling in three-dimensional CAD environment are analyzed,and the parametric modeling scheme based on SolidWorks API is established.The parametric modeling principles of blade,roulette and cover are discussed respectively.The software of parametric modeling for centrifugal impeller is developed in S... |
| |
| Keywords: | SolidWorks API |
| 本文献已被 CNKI 万方数据 等数据库收录！ |
|
