首页 | 本学科首页   官方微博 | 高级检索  
     

取向电工钢的低温拉伸变形和断裂行为
引用本文:安治国,毛卫民.取向电工钢的低温拉伸变形和断裂行为[J].材料研究学报,2009,23(5).
作者姓名:安治国  毛卫民
作者单位:北京科技大学新金属材料国家重点实验室,北京,100083
基金项目:国家自然科学基金50871015资助项目 
摘    要:测量了普通取向电工钢室温至300℃的拉仲性能并观察了拉伸断口形貌.对比分析和定量计算表明,随着拉伸温度的升高P原子在晶界偏聚的程度逐渐降低,使得断口形貌的沿晶特征减弱、解理特征增强.拉伸温度超过100℃以后沿晶断裂特征消失,基体的屈服强度逐渐低于解理强度,使得断口形貌解理特征减弱、韧窝特征增强,至190℃转变成完全的韧窝断口.在100℃-160℃范围内拉伸变形时位错滑移会拖曳柯垂尔气团随之迁移,造成了随温度升高延伸率下降,且屈服强度的降幅减缓.

关 键 词:金属材料  取向电工钢  拉伸变形  断口形貌  偏聚

Analysis on tensile deformation and fracture behaviors of grain oriented electrical steels at low temperature
AN Zhiguo,MAO Weimin.Analysis on tensile deformation and fracture behaviors of grain oriented electrical steels at low temperature[J].Chinese Journal of Materials Research,2009,23(5).
Authors:AN Zhiguo  MAO Weimin
Affiliation:AN Zhiguo MAO Weimin~(**) (State Key Laboratory of Advanced Metals , Materials,University of Science , Technology Beijing,Beijing 100083)
Abstract:
Keywords:metallic materials  grain-oriented electrical steels  tension deformation  fracture surfaces  segregation  
本文献已被 CNKI 万方数据 等数据库收录!
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号