| 9FA燃机过渡段用螺栓断裂分析 |
| |
| 引用本文： | 夏从鑫,王新娟,王莹,贡怡.9FA燃机过渡段用螺栓断裂分析[J].理化检验(物理分册),2012(11):756-758. |
| |
| 作者姓名： | 夏从鑫 王新娟 王莹 贡怡 |
| |
| 作者单位： | 哈电集团(秦皇岛)重型装备有限公司 |
| |
| 摘 要： | 某国产9FA燃机过渡段用螺栓在运行较短时间后发生断裂。采用化学成分分析、力学性能测试及金相检验等方法对螺栓断裂的原因进行了分析。结果表明：由于螺栓螺纹边缘部位凹凸不平造成大量的应力集中而形成微裂纹，在不断的热循环过程中，受热应力的作用微裂纹不断地扩展，直至剩余截面不能再承担负荷而导致螺栓的断裂。
|
| 关 键 词： | 螺栓 断裂 应力集中 |
Fracture Analysis of Bolt for Changeover Portion of Combustion Engine 9FA |
| |
| XIA Cong-xin,WANG Xin-juan,WANG Ying,Gong Yi.Fracture Analysis of Bolt for Changeover Portion of Combustion Engine 9FA[J].Physical Testing and Chemical Analysis Part A:Physical Testing,2012(11):756-758. |
| |
| Authors: | XIA Cong-xin WANG Xin-juan WANG Ying Gong Yi |
| |
| Affiliation: | (Harbin Electric Corporation(QHD) Heavy Equipment Company Limited,Qinhuangdao 066206,China) |
| |
| Abstract: | The home bolt for changeover portion of combustion engine 9FA was fractured in a short time running. A comprehensive analysis to find the fracture reason which was based on chemical composition analysis, mechanical property testing and metallographic examination was made on the bolts. The results showed that the roughness edge of bolt screw thread made stress concentration and caused to micro-crack. The micro-crack extended until the residual cross-section could not subject to the load and then made to fracture that caused by hot stress in the continuously hot recycle process. |
| |
| Keywords: | bolt fracture stress concentration |
| 本文献已被 CNKI 维普 等数据库收录！ |
