首页 | 本学科首页   官方微博 | 高级检索  
     

硬脂酸对三氧化二铬疏水性改性研究
引用本文:罗爽,霍冀川,雷永林,刘正海,邹德军. 硬脂酸对三氧化二铬疏水性改性研究[J]. 中国粉体技术, 2012, 18(3): 53-56
作者姓名:罗爽  霍冀川  雷永林  刘正海  邹德军
作者单位:西南科技大学 四川省非金属复合与功能材料重点实验室-省部共建国家重点实验室培育基地,四川绵阳,621010
基金项目:国家高技术研究发展计划(863计划)项目
摘    要:采用硬脂酸对三氧化二铬颗粒进行表面改性,探讨改性条件对改性效果的影响,并通过活化指数、接触角、红外光谱、X射线衍射、差热分析等测定对改性效果进行表征。结果表明,三氧化二铬表面改性的最佳工艺条件为:改性剂硬脂酸质量分数为2%,改性温度为80℃,改性时间为40 min;硬脂酸在三氧化二铬表面发生吸附键合,形成新的化学键,但未破坏三氧化二铬的晶体结构;改性后,三氧化二铬与水的接触角达145°,其表面性质由亲水变为疏水。

关 键 词:硬脂酸  表面改性  疏水性

Hydrophobic Modification of Chromium Sesquioxide with Stearic Acid
LUO Shuang , HUO Jichuan , LEI Yonglin , LIU Zhenghai , ZOU Dejun. Hydrophobic Modification of Chromium Sesquioxide with Stearic Acid[J]. China Powder Science and Technology, 2012, 18(3): 53-56
Authors:LUO Shuang    HUO Jichuan    LEI Yonglin    LIU Zhenghai    ZOU Dejun
Affiliation:(State Key Laboratory Cultivation Base for Nonmetal Composites and Functional Materials,Southwest University of Science and Technology,Mianyang 621010,China)
Abstract:The surface modification of chromium sesquioxide by stearic acid was investigated,and the results of the modification were characterized by means of the determination of activation index,angle of contact and FT-IR,XRD,TG-DSC.The results show that the optimum technical condition is 2% in dosage,80℃ in temperature and 40 min in time.The stearic acid molecules adsorb on the surface of chromium sesquioxide chemically,and new bonds form.The surface modification do not destroy the crystal structure of chromium sesquioxide.The contact angle of the modified chromium sesquioxide with water is 145°,which indicates that the surface of chromium sesquioxide changes from hydrophilic to hydrophobic after stearic acid modification.
Keywords:stearic acid  surface modification  hydrophobic
本文献已被 CNKI 万方数据 等数据库收录!
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号