首页 | 本学科首页   官方微博 | 高级检索  
     

不同湿度环境中钢/铜配副摩擦磨损性能研究
引用本文:袁文征,邱明,李喜军,张永振.不同湿度环境中钢/铜配副摩擦磨损性能研究[J].润滑与密封,2010,35(4).
作者姓名:袁文征  邱明  李喜军  张永振
作者单位:1. 河南科技大学机电工程学院,河南洛阳,471003
2. 河南科技大学材料科学与工程学院,河南洛阳,471003
基金项目:国家自然科学基金,国家973项目,河南省高校科技创新人才支持计划项目 
摘    要:应用QG-700型高温气氛摩擦磨损试验机研究了CrNiMo钢/黄铜配副在不同环境湿度条件下的滑动摩擦磨损性能,利用三维形貌轮廓仪、EDAX能谱分析仪(EDS)分析了其磨损机制。结果表明:随着环境气氛湿度的增加,配副的摩擦因数、销/盘试样磨损率和摩擦温度均呈降低趋势,摩擦学性能得到改善。销试样的磨损机制主要为黏着磨损,环境湿度的增大弱化了配副材料的黏着磨损。

关 键 词:环境湿度  钢/铜摩擦副  摩擦  磨损机制

Study on Tribological Properties of Steel-copper Couples in Different Humidity Environments
Yuan Wenzheng Qiu Ming Li Xijun Zhang Yongzhen.Study on Tribological Properties of Steel-copper Couples in Different Humidity Environments[J].Lubrication Engineering,2010,35(4).
Authors:Yuan Wenzheng Qiu Ming Li Xijun Zhang Yongzhen
Affiliation:Yuan Wenzheng1 Qiu Ming1 Li Xijun1 Zhang Yongzhen2(1.School of Mechatronics Engineering,Henan University of Science & Technology,Luoyang Henan 471003,China,2.School of Material Science , Engineering,China)
Abstract:By using QG-700 pin-on-disk high temperature and atmosphere tribo-tester,the tribological properties of steel/brass couples in different humidity environments were investigated.The morphologies of worn surfaces of pin specimen were analyzed by using three dimension profile tester and EDS.The results indicate that the friction coefficient of couples,the wear rate of pin and disk and friction temperature show decreasing trend as the environmental humidity increases.The wear mechanism of steel specimen is main...
Keywords:humidity  steel/copper couple  friction  wear mechanism  
本文献已被 CNKI 万方数据 等数据库收录!
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号