首页 | 本学科首页   官方微博 | 高级检索  
     

二级A/O工艺在制革废水脱氮处理工程上的应用
引用本文:陈学群,黄元杰,朱建国.二级A/O工艺在制革废水脱氮处理工程上的应用[J].四川皮革,2012(2):23-27,31.
作者姓名:陈学群  黄元杰  朱建国
作者单位:[1]海宁市环境保护监测站,浙江海宁314400 [2]桐乡市环境保护监测站,浙江桐乡314500 [3]浙江鸿翔建筑设计有限公司,浙江海宁314400
摘    要:通过二级A/O工艺在制革废水脱氮改造处理工程的实践,探索了脱氮工程的运行控制条件,并提出了制革废水脱氮工程去碳和脱氮分级处理的建议。去碳和脱氮分级处理具有投资省、运行费用低、工况易控等优点,其中,二级脱氮建议采用短程生物硝化一反硝化工艺,该工艺具有耐负荷冲击能力强、脱氮效率高、运行稳定的特点,值得推广。

关 键 词:制革废水  二级A/O  短程硝化反硝化

The Application of Two-stage A/O Process in Tannery Waste Water Denitrification
Authors:CHEN Xue-qun  HUANG Yuan-jie  ZHU Jian-guo
Affiliation:1.Haining Monitoring Station for Environmental Protection, Haining 314400,China; 2. Tongxiang Monitoring Station for Environmental Protection, Tongxiang 314500,China; 3. Zhejiang Hongxiang Architectural Desing Co.,LTD, Haining 314400,China)
Abstract:On the basis of practice, this paper explores the control conditions of denitrification, and puts forward proposals for stage treatment of carbon removal and denitrification in tannery waste water denitrification. Stage treatment of carbon removal and denitrification has virtues of low investment, low operation cost and easy control etc. The author recommends short-cut nitrifieation-denitrification in two-stage denitrification. It is good for popularization because of strong bearing capability against impact load, high efficiency of denitrification and stable operation.
Keywords:tanning waste water  two-stage A/O  short-cut nitrifieation-denitrification
本文献已被 维普 等数据库收录!
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号