| 电器支架级进模设计 |
| |
| 引用本文： | 张利君,李义祥. 电器支架级进模设计[J]. 模具工业, 2002, 0(2): 11-15 |
| |
| 作者姓名： | 张利君 李义祥 |
| |
| 作者单位： | 湖南工程学院,湖南,湘潭,411101 |
| |
| 摘 要： | 介绍了一种利用杠杆机构进行由下向上冲裁和弯曲 ,以及利用活动凸模进行封闭形状弯曲的级进模。该模具较好地解决了小尺寸、较复杂弯曲零件用级进模成形的问题 ,为类似零件的成形探索了一条行之有效的途径。
|
| 关 键 词： | 级进模 切舌 封闭弯曲 杠杆 活动凸模 |
| 文章编号： | 1001-2168(2002)02-0011-05 |
| 修稿时间： | 2001-07-12 |
Design of the Progressive Die for the Pedestals for Electrical Devices |
| |
| ZHANG Li_jun,LI Yi_xiang. Design of the Progressive Die for the Pedestals for Electrical Devices[J]. Die & Mould Industry, 2002, 0(2): 11-15 |
| |
| Authors: | ZHANG Li_jun LI Yi_xiang |
| |
| Abstract: | A progressive die that adopting the lever mechanism to stamp upwards and bend the part and utilizing the movable punch to bend the part of close shape was introduced. The progressive die well overcame the difficulties of forming small_sized parts with complicate curving shapes with progressive dies. It explored an effective way for the forming of similar parts. |
| |
| Keywords: | progressive die lancing close_shape bending lever movable punch |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
|
