首页 | 本学科首页   官方微博 | 高级检索  
     

BaAl_2O_4:Eu~(2+),Dy~(3+)长余辉发光材料的燃烧合成及其发光特性
引用本文:李峻峰,邱克辉,赖雪飞,张佩聪,邓苗.BaAl_2O_4:Eu~(2+),Dy~(3+)长余辉发光材料的燃烧合成及其发光特性[J].功能材料与器件学报,2010,16(2).
作者姓名:李峻峰  邱克辉  赖雪飞  张佩聪  邓苗
作者单位:1. 成都理工大学,材料科学技术研究所,成都,610059
2. 四川大学,化学工程学院,成都,610065
基金项目:四川省科技攻关重点项目,四川省教育厅青年基金 
摘    要:以金属硝酸盐和尿素为原料,采用燃烧法合成了发青绿光的BaAl2O4:Eu2+,Dy3+长余辉发光材料。采用XRD、SEM、荧光分光光度计等手段对其进行分析表征。研究结果表明:随着燃烧温度升高,燃烧反应加剧,副产物BaCO3的含量减少,BaAl2O4的结晶程度增加,晶粒尺寸增大。Ba-Al2O4:Eu2+,Dy3+的激发光谱和发射光谱峰值分别为310nm和500nm,均呈宽谱带特征,其发光是由Eu2+的4f65d1→4f7跃迁引起,长余辉特性主要基于Dy3+的电子陷阱作用。

关 键 词:燃烧法  铝酸钡  长余辉发光材料

Combustion synthesis and luminescence properties of BaAl2O4:Eu2+,Dy3+phosphor with long afterglow
LI Jun-feng,QIU Ke-hui,LAI Xue-fei,ZHANG Pei-cong,DENG Miao.Combustion synthesis and luminescence properties of BaAl2O4:Eu2+,Dy3+phosphor with long afterglow[J].Journal of Functional Materials and Devices,2010,16(2).
Authors:LI Jun-feng  QIU Ke-hui  LAI Xue-fei  ZHANG Pei-cong  DENG Miao
Abstract:Using metal nitrate and urea as raw materials,BaAl2O4:Eu2+,Dy3+phosphor with bright turquoise and long afterglow was prepared by combustion synthesis.The properties of phosphor were characterized by means of X-ray diffraction(XRD),scanning electron microscopy(SEM)and fluorospectrophotometer.The results show that,with the increasing of combustion temperature,the violent degree of reaction increases,the content of BaCO3 decreases,the crystallinity of BaAl2O4 increases,and the grain size increases.The peak value of excitation and emission spectrum of BaAl2O4:Eu2+,Dy3+is respectively 310 nm and 500 nm,and the spectrums show characteristic of broad band.The luminescence of phosphor is due to the transitions from 4f65d1to 4f7 configuration of the Eu2+ion.and its long afterglow is due to the effect of electron trap of Dy3+.
Keywords:combustion synthesis  barium aluminate  long afterglow phosphor
本文献已被 CNKI 万方数据 等数据库收录!
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号