| 板坯连铸结晶器内钢水流场和传热凝固数值模拟 |
| |
| 引用本文： | 李广海,赵连刚. 板坯连铸结晶器内钢水流场和传热凝固数值模拟[J]. 钢铁研究学报, 2007, 19(12): 21-0 |
| |
| 作者姓名： | 李广海 赵连刚 |
| |
| 作者单位： | 天津大学管理学院,天津,300072;鞍山科技大学材料学院,辽宁,鞍山,114044 |
| |
| 摘 要： | 以鞍山钢铁集团公司中薄板坯连铸机为研究对象，利用商业软件CFX44对结晶器内钢水流场和传热凝固进行了数值模拟，主要研究了三孔浸入式水口的冶金特征及其对结晶器内钢水流场和温度场的影响。结果表明，采用三孔浸入式水口可以优化结晶器内钢水流场和温度场，稳定坯壳发育和成形，防止拉漏。
|
| 关 键 词： | 三孔浸入式水口 钢水 流场 传热凝固 |
| 文章编号： | 1001-0963（2007）12-0021-05 |
| 收稿时间： | 1900-01-01; |
| 修稿时间： | 2007-03-06 |
Numerical Simulation of Fluid Flow and Solidification in Casting Mold |
| |
| LI Guang-hai,ZHAO Lian-gang. Numerical Simulation of Fluid Flow and Solidification in Casting Mold[J]. Journal of Iron and Steel Research, 2007, 19(12): 21-0 |
| |
| Authors: | LI Guang-hai ZHAO Lian-gang |
| |
| Affiliation: | 1. School of Management, Tianjin University, Tianjin 300072, China;2. School of Material, Anshan University of Science and Technology, Anshan 114044, Liaoning China |
| |
| Abstract: | Aiming at the medium thickness slab caster in Anshan ISCO, numerical simulations concerning heat transfer and solidification process of liquid steel in mold were conducted by using CFX4.4, a commercial software package for fluid flow analysis, in which the metallurgical functions of a submerged nozzle with three holes, specially used in the caster and were investigated. Detailed predictions on the fluid flow, heat transfer and solidification in mold were obtained regarding the difference between 3-hole SEN and general SEN. It is pointed out that the fluid flow and temperature field are optimized, the shell growth and figuration are stabilized and the breakout of the fluid is avoided by using the 3-hole SEN. |
| |
| Keywords: | 3-hole SEN liquid steel fluid flow solidification |
| 本文献已被 维普 万方数据 等数据库收录！ |
| 点击此处可从《钢铁研究学报》浏览原始摘要信息 |
|
点击此处可从《钢铁研究学报》下载全文 |
|
