| 冲击腐蚀磨损系统中影响因素的正交分析 |
| |
| 引用本文： | 吴凯,杜晓东,丁厚福,王凯,严小冲.冲击腐蚀磨损系统中影响因素的正交分析[J].热加工工艺,2005(12):1-2,4. |
| |
| 作者姓名： | 吴凯 杜晓东 丁厚福 王凯 严小冲 |
| |
| 作者单位： | 合肥工业大学,材料科学与工程学院,安徽,合肥,230009 |
| |
| 基金项目： | 教育部博士点基金资助项目（20040359004）;教育部重点研究资助项目（01104） |
| |
| 摘 要： | 用改进的MLD-10型冲击腐蚀磨损试验机，对不同条件下的冶金矿山用低碳高合金钢的冲击腐蚀磨损性能进行了试验。用正交分析法研究了磨粒，冲击功和pH值在低碳高合金钢冲击腐蚀磨损过程中的作用。结果表明，磨粒在冲击腐蚀磨损过程中对材料的影响最大，其次为冲击功，pH值的影响最小。
|
| 关 键 词： | 正交分析 低碳高合金钢 磨粒 冲击功 pH值 |
| 文章编号： | 1001-3814（2005）12-0001-02 |
| 收稿时间： | 2005-07-18 |
| 修稿时间： | 2005-07-18 |
Orthogonal Analysis on Influencing Factors of Corrosive Impact Wear System |
| |
| WU Kai,DU Xiao-dong,DING Hou-fu,WANG Kai,Yan Xiao-chong.Orthogonal Analysis on Influencing Factors of Corrosive Impact Wear System[J].Hot Working Technology,2005(12):1-2,4. |
| |
| Authors: | WU Kai DU Xiao-dong DING Hou-fu WANG Kai Yan Xiao-chong |
| |
| Affiliation: | College of Materials Science and Engineering,Hefei University of Technology,Hefei 230009,China |
| |
| Abstract: | Tested the properties for low carbon high alloy stecl in different condition with a modified MLD-10 corrosive impact wear tester.Using the orthogonal analysis investigated the effect of abrasions,impact energy and PH No.to the low carbon high alloy steel in corrosive impact wear.It was shown that the abrasion has the heaviest influence to the low carbon high alloy steel in corrosive impact wear,the impact cnergy is secondary,and the influcence of PH No.is slightest in the three factors. |
| |
| Keywords: | orthogoaal analysis low carbon high alloy steel abrasion impact energy ph No |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
