| 橡胶密封条挤出成型的数值计算 |
| |
| 引用本文： | 赵建才,姚振强,王刚,周持兴. 橡胶密封条挤出成型的数值计算[J]. 计算机仿真, 2006, 23(3): 275-277,287 |
| |
| 作者姓名： | 赵建才 姚振强 王刚 周持兴 |
| |
| 作者单位： | 1. 上海交通大学机械动力学院,上海,200030
2. 上海交通大学化学化工学院,上海,200240 |
| |
| 基金项目： | 上海市汽车工业科技发展基金 |
| |
| 摘 要： | 橡胶密封条的截面形状非常复杂，影响其挤出成型的因素很多。为了分析牵引速率对密封条产品截面形状的影响，利用计算流体力学软件Polyflow。对一种典型的EPDM胶料的挤出过程进行了模拟计算。计算结果表明：牵引速率对密封条的挤出形状有很大的影响。在相同人口流量的情况下，随着牵引速率的增大，挤出物截面积减小，牵引速率在的范围内，预测的挤出物形状比较合理，对密封条挤出口模的设计具有理论指导作用。
|
| 关 键 词： | 牵引速率 挤出成型 密封条 数值模拟 |
| 文章编号： | 1006-9348（2006）03-0275-03 |
| 收稿时间： | 2005-01-06 |
| 修稿时间： | 2005-01-06 |
Numerical Simulation of Seal Extrusion |
| |
| ZHAO Jian-cai,YAO Zhen-qiang,WANG Gang,ZHOU Chi-xing. Numerical Simulation of Seal Extrusion[J]. Computer Simulation, 2006, 23(3): 275-277,287 |
| |
| Authors: | ZHAO Jian-cai YAO Zhen-qiang WANG Gang ZHOU Chi-xing |
| |
| Affiliation: | 1. School of Mechanical and Power Energy Engineering, Shanghai Jiaotong University, Shanghai 200030, China; 2. School of Chemistry and Chemical Technology, Shanghai Jiaotong University, Shanghai 200240, China |
| |
| Abstract: | The shape of rubber seal is very complex. There are many factors, such as die, rubber material and technique of production, which affect extrusion shape of the seal. The rate of extension is one of the direct factors in the technique of production. In order to analyze the influence of the pulling force on the sectional shape of the seal, Polyflow software, a CFD software of Fluent company, is used to simulate the extrusion of a typical EPDM seal. The results show that the extension velocities evidently influence the sectional shape of products. The sectional area decreases with increasing pulling speed in the range of under same extrusive flux. |
| |
| Keywords: | Pulling speed Extrusion Seal Numerical simulation |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
|
