| 基于力控和MATLAB的IPC模式过程仿真培训系统 |
| |
| 引用本文： | 郭艳宏,;武传宝.基于力控和MATLAB的IPC模式过程仿真培训系统[J].齐齐哈尔轻工业学院学报,2008(6):25-27. |
| |
| 作者姓名： | 郭艳宏 ;武传宝 |
| |
| 作者单位： | [1]齐齐哈尔大学计算机控制与工程学院,黑龙江齐齐哈尔161006; [2]齐齐哈尔职业学院信息工程系,黑龙江齐齐哈尔161005 |
| |
| 摘 要： | 给出了一种基于单台计算机的智能控制仿真培训系统的开发模式。该系统以力控组态软件Force Control作为图形用户界面（GUI）开发平台,采用MATLAB构造实际被控对象模型,并通过DDE技术实现了力控组态软件与MATLAB之间的实时数据通信。此仿真培训系统的开发方法适用于小型精细化工过程操作培训仿真器的开发,给仿真培训系统的开发研究带来便利。
|
| 关 键 词： | 组态软件 MATLAB IPC DDE |
The development of IPC mode process simulation training system based on force control and MATAB |
| |
| Affiliation: | GUO Yan-hong, WU Chuan-bao (1.Computer Control and Engineering Department, Qiqihar University, Heilongjiang Qiqihar 161006, China; 2.Information Enginerring Department, Qiqihar Vocational College, Heilongjiang Qiqihar 161005, China) |
| |
| Abstract: | An IPC （Industrial Personal Computer and Intelligent Process Controller） Mode Process Simulation Training System based on SCADA Configuration Software and MATLAB was introduced. The system uses Force Control as GUI platform and MATLAB to work as a model of real dynamic plant. Real time data exchanging is realized by DDE （Dynamic Data Exchange） between Force Control and MATLAB. The method is applicable in developing Simulation Training System for a small scale fine chemical production process. The system is helpful in studying the development of Simulation Training System. |
| |
| Keywords: | SCADA configuration software MATLAB IPC DDE |
| 本文献已被 维普 等数据库收录！ |
